Israeli Legislation.com
RegulationsHealthLabor Law

Work Safety (Tractors in Agriculture) Regulations, 5732-1972

תקנות הבטיחות בעבודה (טרקטורים בחקלאות), תשל"ב-1972

Published: 1972-09-03Consolidated Hebrew text as of 2025-01-09 · Last amended 2020-05-21
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

By virtue of my authority under sections 173 and 216 of the Work Safety Ordinance [New Version], 5730-1970, I hereby make these Regulations:

Chapter I: General

Definitions§

1.

In these Regulations –

"approved model" – a model for a safety frame in respect of which a valid approval from the Chief Inspector exists in accordance with Chapter III;

"tractor model" – a description of a tractor by make and model;

"operation", in relation to a tractor – driving a tractor and any other use thereof, including any operation of its engine while the tractor is outside the precincts of a garage, and the term "operator" shall be construed accordingly;

"tractor" – a tractor within the meaning of regulation 1 of the Traffic Regulations, 5721-1961, which moves on wheels and whose weight is 600 kg or more;

"authorised inspection institution", "inspection institution" – the Technion Research and Development Institution Ltd.;

"loaded seat" – a seat for the tractor operator loaded with a uniformly distributed load of 75 kg;

"agricultural purposes", "agriculture" – including the needs associated with all of the following:

(1)field crops, garden crops, orchards and nurseries;
(2)animal husbandry, fish farming, poultry farming and egg incubation;
(3)the dairy branch and the poultry branch;
(4)forestry and the extraction of timber from forests;
(5)land preparation for the agricultural purposes listed in paragraphs (1) to (4);
(6)any purpose of an agricultural settlement or a kibbutz settlement, or of a resident thereof, excluding construction and engineering construction;
(7)any purpose of an agricultural education institution or an agricultural research institution, excluding construction and engineering construction;

"safety frame", "frame" – a rigid frame, including a folding frame, intended for installation on a tractor for the purpose of protecting the operator in the event of the tractor overturning, including the connecting accessories on the frame and on the tractor intended for use in its installation, and including a safety cab;

"disqualified frame" – a safety frame that the Chief Inspector has declared to be a disqualified frame in accordance with regulation 31;

"safety frame model specification", "specification" – a description of a safety frame for a tractor, with its connecting accessories to the tractor, including plans of the frame and the accessories as well as details such as dimensions, weight and properties of the parts and materials from which they are made or assembled, the manufacturing processes and the method of installing the frame on the tractor; if the Chief Inspector has determined specification details, the specification shall include the details he has determined;

"weight", in relation to a tractor – its unladen weight within the meaning of regulation 1 of the Traffic Regulations, 5721-1961;

"self-employed worker" – a person engaged in his occupation who has no other person as his employer;

"safety cab", "cab" – a rigidly constructed cab intended for installation on a tractor for the purpose of protecting the operator in the event of the tractor overturning, including the connecting accessories on the cab and on the tractor intended for use in its installation.

Application§

2.

The provisions of these Regulations shall apply to the operation for agricultural purposes and to the keeping for the purpose of operation for agricultural purposes of a tractor imported into Israel after the 26th day of Tevet 5733 (31 December 1972), or before that date if it is of a type of tractors in respect of which the Minister of Labour has given notice in Reshumot (Official Gazette) that these Regulations shall apply to it.

Exemption and Permit§

3.
(a)After consulting with the person authorised by the Minister of Agriculture for the purposes of this regulation, the Chief Inspector or a person authorised by him may –
(1)exempt from the provisions of Chapters II and III, in whole or in part, a tractor of a particular model if in his opinion there is reasonable cause for a safety frame not to be designed for tractors of that model;
(2)permit the operation of a tractor without a safety frame if it appears to him that the operation of the tractor for a particular task in an orchard or a glasshouse is not practicable or is not reasonable when a safety frame is installed on it; the permit shall also be valid for driving the tractor on the way to the orchard or glasshouse for the purpose of operating it in accordance with the permit and on the way from the orchard or glasshouse or after its operation as aforesaid;
(3)permit the operation of a tractor without a safety frame if, according to a notice from the Ministry of Agriculture, security conditions exist in a particular area that require the operation of a tractor without a safety frame.
(b)If it appears to the Chief Inspector that the operation of the tractor as referred to in sub-regulation (a)(2) will constitute the principal part of its operation during the period of validity of the permit, he may permit the operation of the tractor without a frame for any purpose whatsoever.
(c)An exemption and a permit under sub-regulation (a) may be general or specific, and the Chief Inspector may prescribe in the exemption and the permit conditions and restrictions, including a provision that a safety frame not in accordance with an approved model shall be installed on the tractor or that a safety frame in accordance with an approved model intended for a tractor of another model shall be installed.
(d)A general exemption and a general permit shall be published in Reshumot (Official Gazette).

Duty of Employer and Duty of Person Keeping a Tractor§

4.

With regard to the operation of a tractor by an employee – the employer of the tractor operator is obliged to comply with the provisions of Chapters II and III, and with regard to the keeping of a tractor, the person keeping the tractor is obliged to comply with those provisions.

Employee Operating a Tractor§

5.

An employee operating a tractor is obliged to comply with the provisions of regulation 32 that relate to him.

Duty of Self-Employed Worker§

6.

A self-employed worker operating a tractor is obliged to comply with the provisions of the Regulations whether compliance therewith is imposed on the employer or on the person keeping the tractor.

Chapter II: Safety Frame for the Protection of the Operator

Requirement for Safety Frame§

7.

A tractor shall not be operated for agricultural purposes and shall not be kept for the purpose of operation for agricultural purposes unless a safety frame is properly installed on the tractor and the provisions of regulations 8 to 11 have been complied with.

Approved Model§

8.

A safety frame shall be constructed in accordance with an approved model.

Folding Safety Frame§

8a.

A folding safety frame shall be stabilised only by means of the stabilising accessories supplied by the manufacturer.

Permit to Fold a Safety Frame§

8b.

A folding safety frame shall be stabilised at all times, provided that it may be folded if its stabilisation causes an obstruction when the tractor on which it is installed is operated in an orchard or a glasshouse or when it is on the way to or from them for the purpose of operation or after such operation.

Structure of a Safety Frame§

9.
(a)A safety frame shall be made of sound and sufficiently strengthened material and shall be free of visible defect.
(b)On the side of the frame, at a height of between 55 and 90 cm above the horizontal plane of the surface of the loaded seat, there shall be no longitudinal part likely to cause harm to the head of the operator if he were to strike that part, unless on that side there is a part at a height of between 38 and 51 cm above that plane that can serve as a shoulder support.

Marking of a Safety Frame§

10.
(a)A safety frame shall be marked with the following particulars:
(1)the name of the manufacturer or his registered trade mark;
(2)the name and address of the manufacturer's agent who sold the frame;
(3)the year of manufacture and serial number of the frame assigned by the manufacturer, or the year of import and serial number of the frame assigned by the manufacturer's agent;
(4)the model mark of the frame;
(5)the annual serial number of the frame model approval;
(6)the chassis number of the tractor on which the frame is installed.
(b)The marking of the particulars in accordance with sub-regulation (a) shall be clear and durable and shall be made by embossing on the frame or by means of a metal plate permanently attached to the frame.

Requirements for a Safety Cab§

11.

In a safety cab or a safety frame prepared as a cab, the provisions of the Fourth Schedule shall be complied with.

Installation of the Frame§

12.

A safety frame shall –

(1)be prepared for safe installation on a tractor and shall be equipped with suitable connecting accessories for that purpose;
(2)be properly installed on the tractor in accordance with the manufacturer's instructions and in conformity with the conditions and restrictions for its installation prescribed in the approval for the frame model.

Maintenance of Frame§

13.

A safety frame and its installation shall be properly maintained.

Operation of a Tractor with a Defective Frame§

14.

A tractor shall not be operated if the safety frame installed on it has been damaged to the extent that the frame no longer provides adequate protection for the operator or that the frame does not allow safe operation of the tractor, and such a frame shall not be installed on a tractor.

Major Repair of a Frame§

15.

A major repair to a defective frame as referred to in regulation 14, as well as any modification to a frame, shall be carried out in accordance with professional standards by a competent expert, and where practicable – by the manufacturer or on his behalf.

Warning Sign§

16.

On a tractor that is required to be equipped with a safety frame, a warning sign in the following text shall be displayed in front of the operator's seat in a position where the sign is readily visible to the operator:

"Driver!

In the event of danger of overturning, do not jump from your seat! Hold the steering wheel and do not let go – the safety frame/cab protects you!"

Chapter III: Approval of a Safety Frame Model

Grant of Approval for a Safety Frame Model§

17.
(a)The Chief Inspector shall not approve a safety frame model, whether of Israeli manufacture or of foreign manufacture, except on the basis of a report by an inspection institution concerning the tests and examination of a safety frame and a certificate of conformity from such an institution, attesting that a frame in accordance with the model has passed the tests as specified in the First Schedule and indicating the tractor models for which frames in accordance with that model are intended, or attesting that a frame in accordance with the model has passed tests in accordance with I.S.O, OECD or ASAE standards, or in accordance with an EEC Directive; for this purpose –

"I.S.O standard" – I.S.O standard no. 5700 published in the official publication of the International Organisation for Standardisation I.S.O, 5700:1989 (E), and its updates;

"OECD standard" – standard 53(87)C Annexes III and IV published by the Organisation for Economic Co-operation and Development – OECD, and its updates;

"ASAE standard" – ASAE standard no. S519 published by the American Society of Agricultural Engineers in ASAE Standards 1990, and its updates;

"EEC Directive" – Directive 87/402/EEC published in the Official Journal of the European Common Market no. L220 and Directive 86/298/EEC published in that Journal no. L186, and their updates.

(b)The Chief Inspector may also approve a safety frame model of foreign manufacture on the basis of a certificate, recognised by him, from an official institution or from an institution accepted in the relevant field abroad, attesting that the model has been approved for use in the country in which the institution exists and specifying the tractor models for which frames in accordance with that model are intended.

Approval for a Safety Cab Model§

18.

The Chief Inspector may refuse to approve a safety cab model if in his opinion the requirements in accordance with regulation 11 are not met by it.

Application to an Inspection Institution§

19.

A person who wishes to have tests and examination conducted on a safety frame made according to a particular model shall —

(1)request an inspection institution to conduct the tests, examination or other necessary operations in accordance with the First Schedule;
(2)place at the disposal of the inspection institution a frame made according to that model in its complete and equipped state as it will be sold to the public;
(3)place at the disposal of the inspection institution, at its request, a tractor suitable for the installation of that frame, for the purpose of conducting tests;
(4)comply with the conditions of the inspection institution.

Selection of Frame for Inspection§

20.

A person who has applied to an inspection institution in accordance with regulation 19 shall enable the institution, at the institution's request, to select a frame for carrying out tests, examinations or visual inspection from stock held at that time or from current production, and in the case of imported frames — from stock in the country.

Report on Test Results and Certificate of Conformity§

21.
(a)The inspection institution shall provide the person who requested the conducting of tests on a frame with a report on the results of the tests and examinations in accordance with the form in the Second Schedule.
(b)If the inspection institution is satisfied that the frame has passed the tests and examinations in accordance with the provisions of the First Schedule, the institution shall issue a certificate of conformity for the frame model in accordance with the form in the Third Schedule.
(c)The inspection institution shall send to the Chief Inspector a copy of every report and every certificate of conformity.

Certificate of Conformity without Tests and Examinations§

22.
(a)Where the inspection institution has issued a certificate of conformity for a frame model for installation on a tractor of a particular model (hereinafter — the tractor of the first model) and the institution is requested to conduct tests and examinations on a frame made according to that model when installed on a tractor of a model not specified in that certificate of conformity (hereinafter — a tractor of a different model), the institution may refrain from conducting tests on such a frame when installed on a tractor of a different model, if at least the following conditions are met in respect of the frame and the tractor of the different model:
(1)the weight of the tractor of the different model does not substantially exceed the weight of the tractor of the first model;
(2)the method of connection and the parts of the tractor to which the frame is to be connected are in practice identical in both tractor models;
(3)all other parts of the tractor, such as the mudguards and the bonnet cowl, which may serve as support for the frame, are identical in both tractor models.
(b)A certificate of conformity issued under this regulation shall state that it is based on the previous tests and examinations, indicating the date and number of the report.

Application to the Chief Inspector for Approval of a Model§

23.
(a)A person applying for approval of a safety frame model shall submit a written application to the Chief Inspector specifying the following particulars:
(1)the name and address of the applicant;
(2)the name, address and registered mark, if any, of the manufacturer of the frame;
(3)the name and address of the manufacturer's agent, or the name and address of the person who sells frames in the course of business, as the case may be;
(4)a description indicating whether the frames made according to the model are constructed as a safety frame or as a safety cab;
(5)the name of the model;
(6)the tractor models for which the frames made according to the model are intended;
(7)a description of the method of marking the frame required under regulation 10.
(b)The application shall be accompanied by a report from the inspection institution and a certificate of conformity in accordance with regulation 17(a), or a certificate from an institution abroad in accordance with regulation 17(b), as the case may be.
(c)The application shall include such additional information and particulars as the Chief Inspector may require, and without derogating from the generality of this provision, he may require the applicant to attach to the application the model specification for the safety frame, and in the case of a frame constructed as a cab — also a description of the cab with its plans, clarifying the structure of the cab and compliance with the provisions of regulation 11.

Conditions and Limitations on Model Approval§

24.
(a)The Chief Inspector may prescribe conditions and limitations for the approval of a safety frame model, including conditions and limitations relating to the structure of safety frames made according to the model, the method of their manufacture and the method of their installation, and the conditions and limitations for the approval of a model may be prescribed by descriptions, references to documents, by reference to samples or in any other manner.
(b)A safety frame in which or in respect of which any condition or limitation prescribed for the approval of the model has not been complied with shall not be regarded as a frame made according to an approved model.

Requirement for Additional Tests§

25.

The Chief Inspector may, before deciding on an application for approval of a frame model, require that an additional frame made according to that model be submitted to the inspection institution for tests and examinations.

Registration of Model Approval§

26.
(a)Where the Chief Inspector finds that a safety frame model is worthy of approval in accordance with these Regulations, he shall register the approval in respect of the application.
(b)Every approval shall bear an annual serial number and shall have recorded in it the particulars specified in regulation 23(a) and every condition and limitation prescribed for the approval, all in such manner and form as the Chief Inspector sees fit.

Copies of Approval and Publication§

27.
(a)A copy of the approval of a safety frame model shall be provided to any interested person.
(b)The Chief Inspector shall publish from time to time in the monthly journal of the Ministry of Labour and National Insurance a list of approvals issued or revoked; the list may be arranged in sections or in any other form and shall include particulars as the Chief Inspector sees fit.
(c)A notice of the place of publication shall be published in the Publications Gazette.

Repeat Tests and Inspection of Frame Production§

28.

If the Chief Inspector has reasonable grounds therefor, he may at any time after the approval of a safety frame model require the manufacturer, his agent or any person who sells frames in the course of business —

(1)that a safety frame made according to that approved model be submitted to the inspection institution for repeat tests and examinations;
(2)that a frame from the stock of frames then in the country or from current production be presented at the premises of the manufacturer, agent or seller of frames for visual inspection and measurement by a representative of the inspection institution;
(3)that a report from the inspection institution on the repeat tests and examinations or on the visual inspection and measurement conducted in accordance with this regulation be furnished to the Chief Inspector.

Revocation of Approval of a Frame Model§

29.

The Chief Inspector may at any time revoke the approval of a safety frame model if any of the following has occurred:

(1)it has become apparent from experience in using a frame made according to an approved model that the frame is not adequate to provide the necessary protection;
(2)it has become apparent that a number of frames made according to an approved model are not manufactured in accordance with the model specification, the model approval or the conditions and limitations specified in the model approval;
(3)it has been found in repeat tests that the frame did not pass the tests and examination as specified in the Schedule;
(4)it has been found in visual inspection and measurement that the frame is not made according to the approved model or in accordance with the conditions and limitations specified in the approval;
(5)it has been found that a number of frames made according to an approved model were sold without being marked in accordance with regulation 10;
(6)it has been found that the manufacturer, agent or seller did not submit the frame for repeat tests or for visual inspection and measurement, or did not furnish to the Chief Inspector a report from the inspection institution in accordance with regulation 28.

Scope of Revocation and its Publication§

30.
(a)The revocation of an approval of a frame model in accordance with regulation 29 may be general or may be in respect of the installation of frames on tractors of a particular model.
(b)The Chief Inspector shall publish a notice in Reshumot (Official Gazette) of the revocation of an approval of a safety frame model.

Declaration of a Disqualified Frame§

31.
(a)Where the approval of a safety frame model has been revoked in accordance with regulation 29, the Chief Inspector may declare any frame made according to the revoked approval to be a disqualified frame and may order the replacement of every disqualified frame within a period that he shall direct, provided that the period shall not be less than twelve months.
(b)A declaration of a disqualified frame shall be published by the Chief Inspector in Reshumot (Official Gazette) and by additional means likely to ensure that the declaration reaches the knowledge of farmers.
(c)Upon the expiry of the period prescribed for the replacement of a disqualified frame, a disqualified frame shall no longer be regarded as a frame made according to an approved model.

Page 1 of 3

Read the entire law on one page — continuous text, no page breaks, plus formal citations.

RegulationsHealthLabor Law

תקנות הבטיחות בעבודה (טרקטורים בחקלאות), תשל"ב-1972

Tractor Safety Regulations

Work Safety Tractors Agriculture

Tractors in Agriculture Regulations

Agricultural Tractor Safety

Tractor Regulations 1972

Work Safety Regulations Tractors

Agricultural Equipment Safety

Tractor Workplace Safety