Israeli Legislation.com

Integrated Circuits Protection Law, 5760-1999

חוק להגנת מעגלים משולבים, תש"ס-1999

Published: 1999-12-30Consolidated Hebrew text as of 2026-06-29 · Last amended 2017-08-07
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

Definitions§

1.

In this Law –

"integrated circuit" – a product, in its final form or in an intermediate form, in which both of the following conditions are met:

(1)its elements, of which at least one is an active element, and the interconnections between them, in whole or in part, are integrated within or on a layer or layers of material;
(2)the product is intended to perform an electronic function;

"topography" – the arrangement of the three-dimensional shape of an integrated circuit, or an arrangement of a three-dimensional shape prepared for the purpose of manufacturing an integrated circuit, in whatever way it is expressed or fixed;

"date of creation", of a topography – the date on which the topography received expression in writing or was fixed in a tangible form;

"Patents Law" – the Patents Law, 5727-1967.

Scope of Application of the Law§

2.
(a)The provisions of this Law shall apply to an original topography in which one of the following conditions is met:
(1)its creator, at the date of its creation, was an Israeli citizen or resident of Israel;
(2)its creator is a person or corporation that had, in Israel, at the date of its creation, an active establishment for the creation of topographies or for the manufacture of integrated circuits.
(b)The Minister of Justice may direct by Order that the provisions of this Law, in whole or in part, shall apply to an original topography in which the provisions of subsection (a) are not met, if this is determined in an international convention to which Israel is a party.

Requirement of Originality§

3.

A topography is original where one of the following conditions is met:

(1)it is the product of its creator's independent development, and at the date of its creation was not commonplace in use among those engaged in the creation of topographies or in the manufacture of integrated circuits;
(2)it comprises a combination of elements and interconnections that are commonplace in use, provided that the combination as a whole satisfies the originality requirement of paragraph (1).

First Owner of the Topography§

4.
(a)The creator of the topography is the first owner of the topography.
(b)Where the topography was created by an employee as a result of and during the period of the employee's service with an employer, the employer shall be deemed to be the creator of the topography, unless otherwise provided in the contract between them.

Assignment and Licence – Requirement of Writing§

5.

A contract for the assignment of rights in a topography or for the grant of a licence to exploit the rights in a topography shall be made in writing.

Nature of the Exclusive Right§

6.

The owner of the topography has the exclusive right to do, or to authorise another to do, in relation to the topography, each of the following acts:

(1)reproduction of the topography or a part thereof, including by way of embodying the topography in an integrated circuit;
(2)importation, sale, or other distribution for commercial purposes, of –
(a)the topography;
(b)an integrated circuit in which the topography is embodied;
(c)an article containing an integrated circuit as referred to in sub-paragraph (b), but only so long as the article contains a reproduction of the topography made in infringement of paragraph (1).

Other Original Topographies§

7.

The owner of the topography shall have no right in relation to any of the following:

(1)another original topography created on the basis of analysis and evaluation of the topography;
(2)an identical original topography created independently.

Exhaustion of Rights§

8.

The provisions of section 6(2)(b) and (c) shall not apply in relation to an integrated circuit that was sold or distributed by the owner of the topography or with the owner's authorisation, whether in Israel or outside Israel.

Duration of Protection§

9.
(a)The exclusive right in a topography under this Law commences on the date of creation of the topography.
(b)The exclusive right in a topography shall expire on the earlier of the following:
(1)at the end of ten years from the date on which the topography or an integrated circuit in which the topography is embodied was first lawfully sold or distributed commercially, whether in Israel or outside Israel;
(2)at the end of fifteen years from the date of creation of the topography.

Infringement of the Exclusive Right – Tort§

10.
(a)Infringement of the exclusive right is the performance of any of the acts enumerated in section 6 of the Law without the authorisation of the owner of the topography.
(b)Infringement of the exclusive right is a tort and the Civil Wrongs Ordinance [New Version] shall apply to it subject to the provisions of this Law.

Permitted Acts§

11.

Notwithstanding the provisions of section 10, the acts enumerated in this section may be performed without the authorisation of the owner of the topography and without payment:

(1)any act in relation to non-original parts of the topography;
(2)reproduction for private purposes;
(3)reproduction for the purpose of evaluation, analysis, research or teaching;
(4)creation of another original topography on the basis of analysis and evaluation of the topography.

Absence of Knowledge of Infringement§

12.
(a)Where a person acquired or ordered an integrated circuit or an article containing an integrated circuit, not knowing and not being required to know, at the time of the acquisition or the order, that the integrated circuit constitutes an infringing reproduction of a topography protected under this Law, that person may perform the acts enumerated in section 6(2)(b) and (c) in relation to it and shall not be liable for infringement of an exclusive right.
(b)Notwithstanding the provisions of subsection (a), a person who performed the acts enumerated in section 6(2)(b) and (c) shall pay the owner of the topography reasonable royalties in respect thereof, commencing from the day on which that person received notice that the integrated circuit constitutes an infringing reproduction.

Remedies in respect of Assets Produced in Infringement of the Exclusive Right in a Topography§

12a.
(a)At the conclusion of proceedings in an action for infringement of the exclusive right in a topography, the court may, having considered, inter alia, the gravity of the infringement and the interest of another person concerned who is not a party to the action, order –
(1)that an act be performed in relation to the assets produced in infringement of the right (in this section – infringing assets) for the purpose of preventing harm to the owner of the right in the topography, including the transfer of ownership of those assets to the plaintiff if so requested, or their destruction; however, where the court has ordered the transfer of ownership as aforesaid, it may, if it finds that the plaintiff is likely to make use of the infringing assets, order the plaintiff to make such payment as it shall determine;
(2)that an act be performed in relation to assets whose principal and predominant use was the manufacture of infringing assets, for the purpose of preventing the continuation of the infringement before the court or another infringement of a right in a topography.
(b)The provisions of subsection (a) shall also apply in relation to an asset in the possession of a person who did not personally infringe the right as aforesaid, all subject to the provisions of section 34 of the Sale Law, 5728-1968.

Limitation of the Exclusive Right§

13.
(a)The Registrar of Patents, as defined in the Patents Law, may grant a compulsory licence to exploit a topography; for this purpose, a topography shall be deemed to be an invention protected by a patent, the date of creation of the topography shall be deemed to be the date on which a patent was granted for it, and the provisions of the Patents Law, except for section 121, shall apply with the necessary modifications.
(b)A Minister as defined in Chapter VI of the Patents Law may authorise the exploitation of the rights in a topography for the benefit of the State, and for this purpose the provisions of the Patents Law shall apply with the necessary modifications.

Regulations§

14.

The Minister of Justice is responsible for the implementation of this Law and may, with the approval of the Constitution, Law and Justice Committee of the Knesset, make Regulations for its implementation.

Commencement of the Law§

15.

This Law shall commence on the 23rd of Tevet 5760 (1 January 2000).

Application and Transitional Provisions§

16.

The provisions of this Law shall also apply to topographies whose date of creation preceded the commencement of the Law; however, they shall not apply to acts performed in relation to topographies before the commencement of the Law.

LawCivil Law

חוק להגנת מעגלים משולבים, תש"ס-1999

IC Protection Law

Integrated Circuits Law

chip protection law

semiconductor protection

integrated circuit design law

chip design law

IC design protection

Israel chip law

togel

circuit topology law