Israeli Legislation.com

Work Safety (Work at Height) Regulations, 5767-2007

תקנות הבטיחות בעבודה (עבודה בגובה), תשס"ז-2007

Published: 2007-05-01Consolidated Hebrew text as of 2026-10-16 · Last amended 2020-05-21
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

Chapter III: Work at Height

4. This Chapter shall apply to all work at height except abseiling and mast climbing, unless expressly stated otherwise.

5. A performer shall not employ a worker in work at height for any purpose whatsoever, except where the following conditions are met:

(1)the worker is an adult;
(2)the worker has been instructed, as stated in regulation 6, by a work-at-height instructor, and holds a valid certificate attesting to the instruction in accordance with the form in the Schedule; in respect of a worker at a place for which a notice of commencement of construction activity has been received pursuant to Section 192 of the Ordinance, the instruction shall be given by one of the following:
(a)a work-at-height instructor on behalf of a training institution;
(b)a work-at-height instructor who also holds a competency certificate as defined in the Labour Inspection Organisation (Safety Officers) Regulations, 5756-1996 (in these Regulations – the Safety Officers Regulations);
(c)a work-at-height instructor who is also registered in the construction site managers register as defined in the Work Safety (Construction Works) Regulations, 5748-1988;
(d)a work-at-height instructor, even if the conditions set out in sub-paragraphs (a) to (c) are not met in respect of him, provided that he was authorised to instruct at height in that subject before the 3rd of Sivan 5786 (19 May 2026);
(3)the worker is not in a condition liable to endanger him or the workers with him, including as a result of the influence of drugs or intoxicating liquors, or owing to a physical or mental impairment, and if he is in such a condition, the performer did not know and could not have known of it.

6. (a) A work-at-height instructor shall instruct a worker only in the fields of work at height in which he is authorised to instruct.

(a1)The instruction shall be carried out in accordance with a programme appropriate to the field of work at height, in accordance with the subjects detailed in regulation 47.
(b)A work-at-height instructor shall sign a certificate, as stated in regulation 5(2), if the worker has fulfilled the instruction requirements in accordance with a programme appropriate to the field of work at height, and if a work-at-height instructor on behalf of a training institution gave the instruction – the director of the training institution shall also sign the certificate.
(c)The certificate shall be for the field of instruction for which the worker was trained, and it shall be issued for a period not exceeding two years.
(d)The performer shall hold a valid certificate for each worker, signed by a work-at-height instructor as stated in regulation 5(2), and it shall be attached to the register; in construction works, a copy of such a certificate shall also be held by the site manager as defined in the Work Safety (Construction Works) Regulations, 5748-1988.
(e)Notwithstanding the provisions of regulation 5, a person may, for the purposes of instruction, training or examination, work at height without a certificate of participation in instruction, provided that he acts under the direct and continuous supervision of a work-at-height instructor as stated in regulation 5(2).

7. A performer is responsible for supplying all equipment and means required for the performance of the works detailed in these Regulations, in proper working order and in accordance with the requirements of the standard or the Personal Protective Equipment Regulations, as the case may be.

8. (a) A performer shall not employ a worker in work at height except where one of the following conditions is met:

(1)the worker is secured throughout the entire period of work at height by one of the systems detailed in sub-paragraphs (a) to (c) or a combination thereof, being in proper working order and complete and having been inspected pursuant to regulation 9(6), all in accordance with the nature and type of work being performed, provided that the worker shall be connected to them by means of a safety harness:
(a)a fall-arrest system;
(b)a positioning and work-support system integrated with a fall-arrest system;
(c)a fall-prevention system;
(2)a safety net appropriate to the nature of the required work has been installed in a stable and adequate manner, in accordance with the planning, guidance and supervision of a registered and licensed civil engineer pursuant to the Engineers and Architects Law, 5718-1958.
(b)Notwithstanding the provisions of sub-regulation (a), when working from a mobile elevating work platform, a man-riding basket or a mechanised scaffold, every worker shall be tied to a fall-prevention system specifically, connected to an anchor point fixed to the structure of the platform, basket or mechanised scaffold, as the case may be; the connecting means shall be adjusted so that it is as short as possible and prevents the worker from falling from the installation.
(c)This regulation shall not apply –
(1)when using a ladder in the cases detailed in regulation 24(a);
(2)in cargo handling work performed on a vessel;
(3)in tree care, as stated in regulation 17(b)(1).

9. A performer shall ensure that, for the purpose of protecting a worker employed in work at height, the following actions are taken:

(1)a fall-arrest system shall be selected and installed in accordance with the constraints of the fall clearance;
(2)when using a fall-arrest system, the safety harness shall be equipped with no more than one energy absorber, which shall be incorporated in the connecting means or located at one of its ends, all in accordance with the type of fall-arrest system;
(3)the connecting means shall be adjusted so that the height of free fall until the commencement of its arrest is as small as possible and does not exceed that prescribed in the manufacturer's instructions;
(4)when using a fall-arrest system integrated with a positioning and work-support system, the length of the connecting means shall be adjusted so that, if the worker's feet slip from the standing position, the free fall of his body is limited to 50 cm at most;
(5)adjustment of the change in the worker's distance from the anchor point and adjustment of the connecting means, by means of an adjustment device (rope adjuster) or a retractable fall arrester;
(6)inspections of the serviceability and completeness of the PPE systems, with their components and accessories, shall be carried out in accordance with the manufacturer's instructions and at the frequency set by the manufacturer; if a defect is discovered in the equipment before or during use, the performer shall provide the worker with appropriate alternative equipment;
(7)a PPE system that has been activated and arrested the fall of a person's body, or in which a defect has been discovered as stated in paragraph (6), shall be taken out of use for inspection and replacement of assemblies as required; the inspection shall be carried out at a repair centre authorised by the manufacturer; a single-use energy absorber shall be replaced after arresting a fall;
(8)an anchor point shall be determined that will withstand firmly, in the event of a worker's fall, all in accordance with the PPE system for arresting the fall and the conditions of the work being performed;
(9)the structure to which the worker is anchored at height shall be inspected as to its stability and capacity to bear the load of the worker's fall;
(10)the connecting means shall be seized or tied to the anchor point in a manner that ensures adequate grip that prevents any possibility of its release or damage to the connecting means;
(11)the anchor point shall be positioned as high as possible and in any event not lower than the height of the worker's feet, and shall also be positioned so as to prevent the risks of harm from a pendulum movement of the worker's body in the event of a fall;
(12)when using PPE for arresting a fall from height, the possibility of rescuing the worker after his fall has been arrested shall be ensured, within a period of time that will prevent irreversible harm to him, by means of one of the following:
(a)self-rescue by the fallen worker;
(b)an additional worker who is present on the ground, as stated in regulation 12(3);
(c)rescue equipment present on site;
(13)each PPE system shall be accompanied by safety, use and maintenance instructions in the Hebrew and Arabic languages, accompanied, where necessary, by illustrations; the said instructions shall be kept adjacent to the PPE system or at its regular storage location.

10. A performer shall ensure that a worker performing work at height wears safety shoes with special anti-slip soles and a protective helmet appropriate to the nature and type of work being performed.

11. The occupier of the factory is responsible –

(1)for the installation of permanent anchor lines, including anchor points and infrastructure, required at every factory with a permanent structure necessitating work at height integrated with movement along a route that is not a fenced surface; such anchor lines shall be installed with the approval of a competent inspector, a registered and licensed mechanical engineer or a registered and licensed civil engineer, and under his supervision, in accordance with the appropriate standard, and the manufacturer's instructions and guidance;
(2)for maintaining the permanent anchor lines in proper working order;
(3)for inspecting the serviceability of the anchor lines by a competent inspector, a registered and licensed mechanical engineer or a registered and licensed civil engineer, at the frequency prescribed in the manufacturer's instructions, and in the absence of such prescription – once every 5 years; a copy of the inspection shall be held by the occupier of the factory and shall be available for inspection by every performer before he commenced working by means of such lines.

12. A performer shall not employ a worker in work at height except where the following conditions are met:

(1)the work is coordinated with the occupier of the factory and carried out with his knowledge;
(2)a danger zone in which there is movement of motorised vehicles and workers including passers-by shall be marked and signposted to prevent their presence therein; the fencing and signposting of a construction site shall serve as an appropriate alternative to the requirement for marking and signposting as aforesaid; the provisions of this paragraph shall not apply to loading and unloading works of vessels in ports;
(3)during the performance of work at height on a site, an adult on behalf of the performer shall always be present at ground level, in addition to the worker or workers performing the work at height, except during the performance of work by means of a mechanised scaffold;
(4)the additional person as stated in paragraph (3) shall maintain eye contact with the workers at height, shall assist them as required and shall prevent, as far as possible, the gathering of persons in the danger zone;
(5)work at height, between sunset and sunrise, in conditions of poor visibility, in strong winds, continuous rain, snow or hail, shall be performed only in accordance with explicit written safety instructions given by the performer, including as to the manner of performing the work and all equipment required, to be determined by the performer in general or for a specific work;
(6)work at height as stated in paragraph (5) is possible where at least one of the following conditions exists:
(a)the work surface is equipped with adequate and stable lighting;
(b)adequate lighting exists from the ground;
(c)the worker is equipped with a standard and serviceable lamp installed in a stable manner on his protective helmet;
(7)in work performed by use of permanent anchor lines, a copy of the anchor lines inspection as stated in regulation 11(3) has been presented to the performer, close to the commencement of the work;
(8)materials, tools and equipment required by a person for the performance of his task shall be secured against falling and shall be located, as required, in a suitable container;
(9)prior notice as stated in regulation 59 has been sent if such notice was required, and no objection has been received from a regional labour inspector to the performance of the work at height, as stated in regulation 60.

13. A performer seeking to employ a worker at height shall ensure that –

(1)objects or materials shall not be dropped or thrown from a height exceeding 2 metres, except by means of a closed carrier or chute with the area of their fall fenced off to prevent access by a person, or they shall be lowered in a controlled and careful manner, including by means of lifting equipment;
(2)in places where work is performed at various heights, workers shall not be positioned, insofar as practicable, one above the other where the gap between them is free and open, unless a buffer surface capable of safely stopping objects or materials liable to fall has been installed between them, above a person's head.

Chapter IV: Specialised Work at Height

14. The provisions of this Chapter shall apply to all work at height, including abseiling work and mast climbing.

15. In addition to the provisions of Chapter III, a performer seeking to employ a worker in work at height on roofs shall ensure that –

(1)work on fragile, steep and sloping roofs shall be performed in accordance with the provisions of the Work Safety (Work on Fragile or Steep Roofs) Regulations, 5746-1986;
(2)work or passage on a high, horizontal and flat roof that is not a fragile roof, and is not surrounded at its edges by a fence or a standard parapet to prevent a fall from height, without the use of other protective means against falling from height, shall be performed only in the areas of the roof that are situated at a distance of more than 2 metres from the open edges, provided that safe access to the said areas of the roof exists; the boundaries at a width of 2 metres along the edges of the roof, access to which is prohibited without the use of protective means for work at height, shall be marked by the performer before the commencement of work using appropriate and conspicuous means that shall remain in their place, including warning signs in Hebrew and Arabic: "No entry – danger of falling from height!".

16. (a) A performer shall not employ a worker at height unless all measures to prevent harm to the worker as a result of proximity to electricity lines have been taken, including maintaining the greatest possible distance from electricity lines, provided that all of the following conditions are met:

(1)a distance of at least 3.25 metres of the workers and their equipment from the conductors of electricity lines at a voltage of up to 33 kilovolts, or of at least 5 metres from the conductors of electricity lines at a voltage exceeding 33 kilovolts, shall be maintained; in this paragraph, "equipment" – the worker's equipment, including installations and materials;
(2)where work is required at a distance smaller than that prescribed in paragraph (1), the performer shall do one of the following:
(a)ensure that the lines have been disconnected from the voltage supply source;
(b)take special measures such as the installation of partitions or fences to prevent direct or indirect contact by a person with the conductors of electricity lines that are under voltage; at the time of installation or removal of partitions or fences as aforesaid, the electricity lines shall be disconnected from the voltage supply source.
(a1)Notwithstanding the provisions of sub-regulation (a), with respect to Israel Railways workers who install or maintain the signalling system on the railway track and who have been trained for work at height and in an electrical environment, the provisions of paragraph (1) shall be read as if "2 metres" were substituted for "3.25 metres"; in this regulation, "railway track" – a track as defined in section 2(1) and (2) of the Railways Ordinance [New Version], 5732-1972, including installations erected for the purpose of, or in connection with, a track as referred to in section 2(3) of the said Ordinance, excluding stations, offices, embankments, workshops, garages, machinery and other permanent fixed equipment.
(b)The provisions of this regulation shall not apply to employees of the Israel Electric Corporation Ltd. who install or maintain the electricity network and who have been trained for this purpose.

17. (a) A performer shall not employ a worker in work at height by means of a mobile elevating work platform, a mechanised suspended scaffold, a mechanised mast scaffold or a man-riding basket (in this regulation – an installation) except where the following conditions are met:

(1)the installation has undergone a thorough inspection by a qualified inspector, under the conditions and at the frequency determined pursuant to the Ordinance, and an inspection report has been received from the inspector certifying the serviceability of the installation for safe operation;
(2)with regard to a man-riding basket, the inspection report expressly states the suitability of the basket for the lifting machine on which it may be mounted;
(3)anchor points exist on the work surface or basket of the installation, as the case may be, for the purpose of connecting the worker or workers in a safe manner by means of a fall-prevention system;
(4)the worker operating the installation is a person who has been certified or trained for operating the installation as required by the Work Safety (Crane Operators, Operators of Other Lifting Machines and Signallers) Regulations, 5753-1992;
(5)in the inspection conducted by the operating worker at the beginning of each day, before the operation of the installation, no exceptional findings have been discovered in any of the following:
(a)tyres, cables, work surface or lifting basket, including fencing and guardrails, counterweights, safety signs and the like;
(b)the operating systems of the installation;
(c)access routes to the place of performing the work, including obstacles that have been marked in a conspicuous manner, so as to enable the operator to see them in time;
(6)no abnormal noises or uncontrolled movements have been found during the operation of the installation and in the course of its work, the installation has not been found on a dangerous slope, and no operational malfunctions, abnormal responses of emergency buttons and operating handles, and the like, have been found;
(7)a worker at height shall be harnessed to an anchor point in the installation in accordance with the provisions of regulation 8(b);
(8)the transfer of a person from a work surface in the installation to a working position at height shall be carried out only where all of the following conditions are met:
(a)the working position is stable and properly fixed;
(b)the work surface in the installation is adjacent to the working position and no movement is taking place therein;
(c)the worker's connecting means to the anchor point on the work surface in the installation shall not be disconnected until the requirement of sub-paragraph (b) has been fulfilled;
(d)the worker shall connect himself to another connecting means in a fall-arrest system, installed in a stable and safe manner at the working position, before transferring to the working position;
(e)the installation shall remain in its position without movement until the worker at height has moved to a distance of 2 metres from it, and in the absence of such a distance, to the maximum possible distance from it;
(f)the installation shall be moved from the working position with the utmost care and after all measures to prevent harm to the worker have been taken;
(9)no equipment or worker that was not taken into account in advance in the calculation of the loading capacity of the installation, within the possible working ranges, at the angle or height, has been loaded onto the work surface in the installation.
(b)Notwithstanding the provisions of paragraphs (7) and (8)(c), (d) and (e) of sub-regulation (a), the work may be performed without the use of a safety harness in the following works:
(1)tree work, including date palm pruning, from a mobile elevating work platform whose work surface fully encircles the trunk of the tree, and only when the work is performed in the direction of the centre of the platform, including climbing on the branches above the work surface to a height not exceeding two metres above that surface;
(2)storage of items on shelves fixed to a structure in an enclosed building, when the installation is positioned on a level and stable floor, without obstacles, and the worker has convenient access, without leaning his body outside the work surface.

Read the entire law on one page — continuous text, no page breaks, plus formal citations.