Israeli Legislation.com
RegulationsHealthLabor Law

Work Safety (Occupational Hygiene and Health of Workers in Certain Metals) Regulations, 5753-1993

תקנות הבטיחות בעבודה (גיהות תעסוקתית ובריאות העובדים במתכות מסוימות), תשנ"ג-1993

Published: 1993-03-01Consolidated Hebrew text as of 2023-09-18 · Last amended 2020-05-21
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

By virtue of my authority under sections 173 and 216 of the Work Safety Ordinance [New Version], 5730-1970, I make these Regulations:

Definitions§

1.

In these Regulations –

"authorised laboratory examiner" – an employee of an accredited laboratory who has been authorised by a Chief Labour Inspector to carry out occupational environmental examinations of metal concentrations in the air at workplaces;

"maximum permissible weighted exposure" – Threshold Limit Value – Time Weighted Average (TLV-TWA) – the maximum weighted level of metal in the air in the work area of the worker up to which exposure is permitted during an 8-hour working day within a 24-hour period;

"treatment" – including storage, arrangement, assembly, repair, coating, dismantling, renewal or cleaning;

"dental technology" – as defined in the Dental Surgeons (Definition and Regulation of the Scope of Work of Dental Technicians) Regulations, 5746-1986;

"transport" – including carriage, conveyance, transfer, movement from place to place, filling, emptying, loading or unloading;

"laboratory for toxicological examinations" – a laboratory that the Minister of Labour and Welfare, with the consent of the Minister of Health, has accredited by notice in Reshumot (Official Gazette) to carry out biological toxicological examinations required under these Regulations in respect of workers who are exposed or are about to be exposed to a metal;

"accredited laboratory" – the occupational hygiene laboratory of the Ministry of Labour and Welfare, and any other laboratory that a Chief Labour Inspector has accredited to carry out occupational environmental examinations of metal concentrations in the air at workplaces;

"medical laboratory" – a laboratory in which the provisions of the Public Health (Medical Laboratories) Regulations, 5737-1977 are complied with;

"labour inspector", "Chief Labour Inspector" and "regional labour inspector" – as defined in the Labour Inspection (Organisation) Law, 5714-1954;

"hard metals" (hereinafter – hard metals) – a hardened mixture of carbides, including those of tungsten, titanium, tantalum, vanadium and other metals, including nickel and cobalt;

"metal" – a metal from among the metals listed in the First Schedule, including hard metals, including its organic and inorganic compounds as well as alloys and mixtures containing that metal or its compounds in any form;

"biological exposure indices" – Biological Exposure Indices (BEI) – biological levels in the human body, including in blood, plasma, urine and exhaled air, which constitute a biological warning threshold in respect of the worker's exposure to a metal;

"work" – including manufacture, use, processing, treatment, transport or maintenance work;

"metal worker" – any of the following:

(1)a person who works in contact with or in exposure to a metal and is exposed to a concentration of metal in the air in the vicinity of his breathing zone that exceeds the action level, for at least 200 hours per year, unless a regional labour inspector has directed a different period;
(2)a person who works in contact with or in exposure to a metal, in a type of work or work process specified in the Second Schedule, for at least 200 hours per year;

"authorised physician" – a physician who is a specialist in occupational medicine, as well as a physician of an authorised medical service whom the Minister of Labour and Welfare, with the consent of the Minister of Health, has authorised for the purposes of these Regulations;

"action level" – Action-Level (AL) – a level of one half of the maximum permissible weighted exposure;

"authorised medical service" – any of the following:

(1)a district or sub-district health bureau of the Ministry of Health;
(2)a health fund, as defined in the National Health Insurance Law, 5754-1994;
(3)a medical institution that the Minister of Labour and Welfare, with the accreditation of the Minister of Health, has accredited for the purposes of these Regulations.

Exposure to Metal§

2.
(a)In a plant or workplace in which a particular metal is worked, the values of the maximum permissible weighted exposure and the action level shall be as specified in the Second Schedule to the Work Safety (Environmental Monitoring and Biological Monitoring of Workers Exposed to Harmful Agents) Regulations, 5771-2011 (hereinafter – the Monitoring Regulations).
(b)The calculation of the weighted exposure shall be carried out by the following method:

where:

C – concentration of metal in the air, in milligrams per cubic metre of air;

T – duration of sampling, in hours or minutes.

Occupational Environmental Examinations§

2a.
(a)In a plant or workplace in which a metal is used or in which workers are liable to be exposed to a metal, the employer shall arrange, by means of an authorised laboratory examiner, an initial occupational environmental examination of the concentrations of metal in the air at the plant or workplace.
(b)A regional labour inspector may direct, from time to time, at his discretion, that an additional occupational environmental examination be carried out at that plant or workplace, even if the results of the examination referred to in sub-regulation (a) show concentrations that do not exceed the action level.
(c)In a plant or workplace in which an occupational environmental examination carried out therein shows concentrations of metal in the air above the action level, as well as in a plant or workplace in which a type of work or work process listed in the Second Schedule is conducted, the employer shall arrange, by means of an authorised laboratory examiner, periodic occupational environmental examinations of the concentration of metal in the breathing zone of the workers, at a frequency of at least once every six months, unless a regional labour inspector has directed a different frequency.

Recording and Publication of Examination Results§

3.
(a)In a plant or workplace in which the occupational environmental examinations specified in regulation 2a (hereinafter – the occupational environmental examinations) have been carried out, the employer shall record the results of the occupational environmental examinations of the concentrations of metal in the air in a monitoring register, noting the date, time and location of the sampling, and shall immediately send a copy of these results to the regional labour inspector, to the occupational hygiene laboratory of the Ministry of Labour and Welfare, and also to the authorised medical service carrying out the medical examinations in accordance with these Regulations at that plant or workplace.
(b)The employer shall publish in the various workstations at the plant or workplace in which metal is worked the results of the occupational environmental examinations relating to that workplace, so that they are brought to the attention of all workers.
(c)The employer shall retain the results of the occupational environmental examinations for at least twenty years from the date of their performance.
(d)Where an employer has carried out occupational environmental examinations by means of an accredited laboratory other than the occupational hygiene laboratory of the Ministry of Labour and Welfare, the accredited laboratory shall send the results of the occupational environmental examinations it carried out to the occupational hygiene laboratory of the Ministry of Labour and Welfare, and shall also retain them for at least fifty years.

Occupational Hygiene Measures§

4.

In a plant or workplace in which metal is worked, the employer shall adopt the following hygiene measures:

(1)to install and maintain good and effective suction, drainage and emission means, or any other method, in all workplaces, so that the concentration of metal in the air is below the maximum permissible weighted exposure and in a manner that does not harm the health of the worker;
(2)to install and maintain appropriate and effective fume hoods with sufficient suction capacity, during work, in the weighing or examination of metal and of powders containing metal, including in laboratories;
(3)to ensure the immediate collection and removal of waste containing metal from workstations, in a manner that does not cause nuisance or harm to the health of the worker;
(4)to provide each metal worker with appropriate work clothing, including shoes and socks intended exclusively for work, as well as a toothbrush and toothpaste for brushing teeth, and a brush and soap for cleaning hands and nails;
(5)to ensure the daily laundering and cleaning of work clothing in a centralised manner at the plant, or at another place brought to the attention of a regional labour inspector;
(6)to install double and separate lockers for each worker, one for work clothing and one for clean clothing; as well as showers with hot water, soap and individual towels in an adequate number;
(7)to designate special rooms for eating and drinking, smoking and resting of workers;
(8)to ensure special arrangements for emergency situations, including escape routes, rescue and evacuation of workers.

Personal Protective Equipment§

5.
(a)In special circumstances in which the metal worker may be exposed to exceptional concentrations of metal in the air, higher than the exposure standards set pursuant to regulation 2, the employer shall provide the worker with effective personal protective equipment of good quality, and the worker shall be obliged to use it. The protective equipment shall be personal and shall not be transferred to another worker, and shall include, inter alia and as required: a breathing mask fitted with a filter appropriate to the metal, which shall be replaced with a new filter at the frequency required by the manufacturer's instructions or by a regional labour inspector.
(b)The employer shall likewise provide the worker with appropriate protective clothing, protective gloves and protective cream, and the worker shall be obliged to use them.
(c)The employer shall ensure that the worker keeps the personal protective equipment issued to him clean and shall instruct him accordingly.
(d)The supply of personal protective equipment to workers shall not release the employer from the obligation to remedy environmental conditions at the plant and to reduce the level of metal in the air to below the maximum permissible weighted exposure.
(e)A metal worker shall not clean personal protective equipment, work clothing, machines, work tables, floors, walls and any object or location at the plant or workstation by means of a compressed air jet; cleaning operations as aforesaid shall be carried out only by means of suitable vacuum cleaners and suction systems.

Obligation to Provide Training§

6.

The employer shall ensure, in cooperation with the workers' representatives and the safety committee at the plant – if one exists – that appropriate training is organised for all workers, at the time of commencement of employment, and also at least once a year, regarding the safety, hygiene and health risks arising from work with metal, and regarding methods for preventing such risks; the employer shall verify that the worker has understood the material in which he was trained, and the employer and the safety committee shall also verify that the worker carries out all the instructions and procedures established in respect of work with metal.

Personal Hygiene Measures§

7.
(a)A worker shall not eat, drink or smoke in a place in which metal is worked, except in the special rooms installed for this purpose by the employer.
(b)A metal worker shall brush his teeth with a toothbrush and clean his hands and nails with a brush, soap and water, upon completion of work and before going to eat or drink.
(c)At the end of the working day, a metal worker shall remove his work clothing and leave it in the lockers designated for that purpose at the plant, and shall also shower before putting on clean clothing.
(d)Workers shall enter the dining room only after cleaning their work clothing with vacuum cleaners.
(e)(Repealed)

Obligation of Signage and Caution in the Transport and Storage of Metal§

7a.
(a)An employer shall ensure that the transport and storage of metal are carried out in closed and covered containers and by safe and appropriate means.
(b)An employer shall ensure that appropriate and conspicuous signage is posted in every hall or workstation in which metal is worked, in the following wording:

"Caution! Metal work area; appropriate safety and hygiene measures must be taken; smoking is prohibited!".

Obligation to Undergo Medical Examinations§

8.
(a)No person shall be employed as a metal worker unless he has undergone an initial medical examination within the month preceding the commencement of work, by an authorised physician, who shall determine his fitness to begin working with metal.
(b)No metal worker shall be employed unless he has undergone a repeated medical examination, once a year, by an authorised physician, who shall determine his continued fitness to work with metal.
(c)A metal worker who has been absent from work due to a surgical procedure or due to a prolonged illness causing the worker's absence from work for more than two months shall not be employed with metal unless he has undergone an additional medical examination by an authorised physician, who shall determine his continued fitness to work as a metal worker.
(d)An authorised physician and a labour inspector who is a physician may direct that medical examinations as aforesaid be carried out at dates earlier than those referred to in sub-regulation (b), and may also apply the obligation to carry out medical examinations to a worker who is not a metal worker as defined in regulation 1.
(e)Where a worker has not appeared for repeated medical examinations on the date set for him, the authorised medical service shall send a notification thereof to the employer and a copy thereof to the regional labour inspector.

Scope of Medical Examinations§

9.
(a)An initial, repeated or additional medical examination shall include at least:
(1)a general and occupational medical history;
(2)a general clinical examination, with particular attention to the digestive system, the pulmonary and respiratory system, the cardiovascular system, the liver, the kidneys and the skin;
(3)a general blood count examination, including haemoglobin and thrombocytes;
(4)a general urine examination, including protein levels;
(5)liver function tests, including total bilirubin, alkaline phosphatase and transaminase (SGOT and SGPT) in blood, in an initial medical examination only;
(6)kidney function tests, levels of various proteins in blood, and creatinine levels in blood, in an initial medical examination only;
(7)a large standard chest X-ray – at the initial examination and as required; in the case of work involving exposure to hard metals dust and beryllium, a large chest X-ray every three years for a worker who has not yet reached the age of 40, and every two years for a worker who has reached the age of 40;
(8)lung function tests and examination of the respiratory tract;
(9)an X-ray of the facial sinuses and skull – in the initial examination only and as required – according to the work with the particular metal;
(10)examination of the biological exposure indices (BEI) specific to each of the particular metals, with their values being as specified in the Third Schedule to the Monitoring Regulations;
(11)any additional clinical or laboratory examination at the discretion of the examining authorised physician.
(b)The laboratory examinations specified in sub-regulation (a)(3), (4), (5) and (6) shall be carried out in a medical laboratory, and the laboratory examinations specified in sub-regulation (a)(11) shall be carried out in a laboratory for toxicological examinations.

Obligation to Maintain a Medical Examination Card§

10.
(a)An authorised medical service shall maintain, in respect of each worker it examines, a medical examination card on which the personal details of the worker shall be recorded, including his full name, his father's name, his identity number and his address, as well as the following details:
(1)the date of performance of the medical examination;
(2)the name of the employer and the location of the plant;
(3)a description of the worker's work in connection with which the medical examination was carried out;
(4)the findings of the various clinical and laboratory examinations;
(5)the results of the medical examinations, the conclusion and opinion of the examining authorised physician regarding the fitness or unfitness of the worker to begin or continue working as a metal worker;
(6)the date for the repeated medical examination, including any date that has been brought forward;
(7)the name and signature of the examining authorised physician.
(b)The authorised medical service shall retain the medical examination card for at least 30 years after the metal worker in certain metals has ceased his work in certain metals.

Health Booklet§

11.
(a)An authorised medical service shall issue in respect of each worker it examines in accordance with these Regulations a health booklet, in which the authorised medical service and the employer shall record the details specified in the Fourth Schedule and shall confirm them with a stamp and signature; where a health booklet has been issued to the worker pursuant to other work safety regulations, the said details shall be recorded in the booklet first issued to the worker, as well as the results of the various medical examinations in which he was examined and the diagnoses determined in respect of him.
(b)An authorised medical service shall deliver the health booklet to the employer of a metal worker, who shall keep it at the workplace for as long as the examinee works with metal for him; where a metal worker has ceased to work for him, the employer shall return the booklet to the authorised medical service that carried out the last medical examination.
(c)An authorised physician shall bring to the attention of the worker examined by him, within a reasonable time, his state of health in the manner and form to be determined.

Employer's Obligation to Arrange Medical Examinations§

12.
(a)The medical examinations pursuant to regulation 8 shall be carried out upon the application of the employer on the days and dates to be set by the authorised medical service.
(b)A metal worker is obliged to appear before the authorised medical service for the purpose of carrying out the medical examinations as aforesaid, on the days and dates set for him.
(c)The time required for the purpose of carrying out the medical examinations shall be counted for the worker as part of his working hours.

Unfitness to Work with Metal§

13.

A worker shall be deemed unfit to be a metal worker if any of the following is found in him:

(1)acute or chronic poisoning from a particular metal;
(2)contact dermatitis (Contact Dermatitis);
(3)impairment of kidney function or chronic kidney damage;
(4)impairment of liver function or chronic liver damage;
(5)impairment of lung function, or chronic diseases of the respiratory tract and lungs;
(6)hard metal disease;
(7)findings of biological exposure index values that deviate from those specified in the Third Schedule to the Monitoring Regulations; a deviation above the BEI values constitutes a conclusive determination of unfitness, even in the absence of other clinical or laboratory findings, after a repeated examination has been carried out within 15 days;
(8)he has not yet reached the age of 18;
(8a)she is a woman of childbearing age or a nursing woman, and in her workplace the air in the vicinity of her breathing zone contains cadmium and its derivatives at a concentration exceeding that specified in the Second Schedule to the Monitoring Regulations;
(9)any other unfitness in the opinion of the examining authorised physician.

Notification to the Labour Inspector of a Worker's Unfitness§

14.
(a)Where the examining authorised physician has determined that a person is unfit to be a metal worker or to continue working as a metal worker, the authorised medical service shall deliver a special notification thereof to the regional labour inspector within ten days of the date on which the examining authorised physician gave his opinion, containing the results of the medical examination and his conclusions.
(b)Where a regional labour inspector has received from the authorised medical service a notification pursuant to sub-regulation (a) –
(1)he shall send to the employer by registered post a warning containing details of his obligations regarding the prohibition on employing the worker; a copy of the warning shall be sent to the National Insurance Institute, to the authorised medical service and to the workers' representatives representing the worker;
(2)he shall examine the circumstances that caused the overexposure to metal and the worker's unfitness to continue working with metal, and shall require the rectification of the deficiencies as necessary;
(3)such a worker shall not return to work as a metal worker unless he has undergone an additional medical examination by an authorised physician and has been re-approved to continue working as a metal worker.

Prohibition on Employment after Receipt of Warning§

15.

An employer who has received a warning regarding the unfitness of a worker to continue working as a metal worker shall cease to employ him as a metal worker within one week of the date of receipt of the warning and shall act in respect of him in accordance with the instructions received from the regional labour inspector.

Obligation to Notify Commencement of Work with Metals§

16.

No work with metal shall commence at a workplace or plant unless prior written notice of this has been given at least three months in advance to the regional labour inspector.

Prohibition on Use of Beryllium§

16a.

No person shall use beryllium or an alloy containing beryllium in dental technology work.

Exemption§

16b.

A Chief Labour Inspector may exempt a particular workplace in which a type of work or work process specified in the Second Schedule is conducted from some of the provisions of these Regulations, for a fixed period, subject to the restrictions and conditions he may direct.

Commencement§

17.

These Regulations shall commence 30 days from the date of their publication.

Transitional provision§

18.

In a workplace or a plant in which work in a metal was carried out before the commencement of these Regulations, the employer shall, notwithstanding the provisions of regulation 16, send notice thereof to the regional labour inspector within 30 days from the date of the commencement of these Regulations.

Page 1 of 2

Read the entire law on one page — continuous text, no page breaks, plus formal citations.

RegulationsHealthLabor Law

תקנות הבטיחות בעבודה (גיהות תעסוקתית ובריאות העובדים במתכות מסוימות), תשנ"ג-1993

Work Safety Regulations 5753

Occupational Hygiene and Health Regulations

Workers Metals Health Regulations

Tekanot Betichut Beavaoda

Occupational hygiene metals

Work safety metals regulations

Certain metals health regulations

Workers health and safety metals

Tekanot Betichut 1993