Israeli Legislation.com

Vehicle Sector Services and Professions Licensing Law, 5776-2016

חוק רישוי שירותים ומקצועות בענף הרכב, תשע"ו-2016

Published: 2016-07-18Consolidated Hebrew text as of 2026-09-30 · Last amended 2026-03-31✓ Amendment status checked against the Knesset legislation record on 2026-11-13
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

Chapter VI: Vehicle Trading

Chapter VI – Definition§

88.

In this Chapter, "importer vehicle" means a vehicle purchased from a direct importer or from an indirect importer for the purpose of selling it in the course of business and first registered in Israel in the name of the purchaser under the Traffic Ordinance [New Version], provided that the conditions for the importation of a vehicle by an importer as referred to in section 32(5) or (6) are satisfied in respect of it.

Licence for a Dealer in Importer Vehicles§

89.

A person in whom all of the following conditions are satisfied is entitled to receive a licence as a dealer in importer vehicles:

(1)the person is an individual resident in Israel who is a registered dealer, or is a corporation lawfully registered in which at least one of the interested parties and the general manager are residents of Israel;
(2)the person has at their disposal an appropriate place for the management of their business, including for the parking of vehicles that they sell, as prescribed by the Minister;
(3)the person has produced a confirmation from an auditor attesting that they have equity capital, as prescribed by the Minister, after consultation with the Minister of Finance, in accordance with the type of vehicle, and in respect of a person who held a licence under this Section in a previous year – also in accordance with the number of vehicles that they sold in that year.

Application of Obligations to a Dealer in Importer Vehicles§

90.

The obligations prescribed in sections 81 to 87 shall apply to a dealer in importer vehicles, with the necessary modifications.

Obligation to Report on Equity Capital§

91.
(a)A dealer in importer vehicles shall submit to the Director, by 31 July of each year, an auditor's confirmation based on audited financial statements in respect of the previous year, as prescribed by the Minister, to the effect that they have equity capital as referred to in section 89(3).
(b)If the equity capital of a dealer in importer vehicles falls below the equity capital referred to in section 89(3), the dealer shall report this to the Director in writing within seven days.

Licence for a Dealer in Vehicles that are not Importer Vehicles§

92.

A person in whom all of the following conditions are satisfied is entitled to receive a licence for the purchase and sale in the course of business of vehicles that are not importer vehicles:

(1)the person is an individual resident in Israel who is a registered dealer, or is a corporation lawfully registered in which at least one of the interested parties and the general manager are residents of Israel;
(2)the person has at their disposal an appropriate place for the management of their business, including for the parking of vehicles that they sell, as prescribed by the Minister;
(3)such additional conditions as the Minister may prescribe, with the approval of the Committee.

Application of Obligations to a Dealer in Vehicles that are not Importer Vehicles§

93.
(a)The obligations prescribed in sections 82 and 87, and the provisions of the Used Vehicle Sale (Entitlement to Information and Fair Disclosure) Law, 5768-2008, shall apply to a dealer in vehicles that are not importer vehicles, all with the necessary modifications.
(b)A dealer in vehicles that are not importer vehicles shall register the vehicle in the name of the purchaser as soon as possible after its delivery and no later than the end of six working days from the said date.

Obligation to Display Signage§

94.

The holder of a licence under this Chapter shall display a sign that is conspicuous to the eye at the place of sale, which shall include their name and their licence number.

Prohibition on Transporting Passengers or Carrying Cargo for Remuneration§

95.

The holder of a licence under this Chapter shall not transport passengers for remuneration in vehicles in which they deal, and shall not carry cargo for remuneration in such vehicles, and shall not permit another to do so.

Chapter VII: Transportation Products

Section A: Definitions

Chapter VII – Definition§
96.

In this Chapter, "transportation product" means –

(1)for the purposes of manufacture – a transportation product prescribed by the Minister by Order under section 97;
(2)for the purposes of importation – a transportation product prescribed by the Minister by Order under section 108;
(3)for the purposes of trade – a transportation product as defined in section 2, other than a product or type of product prescribed by the Minister by Order under section 126.

Section B: Manufacture of Transportation Products

Determination of application to Transportation Products – Section B§
97.

The Minister shall prescribe by Order, having regard to safety or environmental considerations, transportation products intended for marketing in Israel only, to which the provisions of this Section shall apply, other than transportation products for vehicles of the type of tractor and mobile machine and for vehicles exempt from registration and licensing obligations under that Ordinance; such an Order shall be prescribed with the consent of the Minister of Finance and the Minister of Economy and Industry.

Licence for the Manufacture of Transportation Products§
98.

A person in whom all of the following conditions are satisfied is entitled to receive a licence for the manufacture of transportation products:

(1)the person is a registered dealer, or a corporation lawfully registered in Israel in which at least one of the interested parties and the general manager are residents of Israel;
(2)the person has at their disposal a place and equipment appropriate for the manufacture of the transportation products that they seek to manufacture and for their storage;
(3)the person has at their disposal a person responsible for the manufacturing processes at the manufacturing plant who has the education, knowledge and experience in the field of transportation products, as prescribed by the Minister;
(4)the person has presented an agreement with an accredited vehicle laboratory, for at least the period of the licence, for the purpose of supervising the manufacture of transportation products at the manufacturing plant pursuant to supervision arrangements prescribed by the Minister, inter alia in order to ensure the conformity of the serial production of the transportation product to its prototype;
(5)the person has presented to the Director appropriate internal supervision arrangements for quality assurance and quality control of the manufacturing work carried out at the manufacturing plant, inter alia in order to ensure the conformity of the serial production of the transportation product to its prototype.
Obligation to obtain approval for the manufacture of a transportation product model§
99.

No person shall manufacture a transportation product unless that person has received approval for the manufacture of a transportation product model in accordance with the provisions of this Section, and in accordance with the conditions of the approval and the provisions under this Law.

Approval for the manufacture of a transportation product model at a manufacturing plant§
100.
(a)A person in whom all of the following conditions are met is entitled to receive approval for the manufacture of a transportation product model:
(1)that person holds a licence for the manufacture of transportation products;
(2)that person has presented to the Director an approval from an authorised laboratory that the prototype of the transportation product that the person seeks to manufacture at the manufacturing plant meets the requirements of an official standard, and if there is no official standard for the product — that person has presented to the Director one of the following:
(a)an approval from an accredited vehicle laboratory that the prototype meets the standardisation requirements set by the Minister, after consultation with the Minister of Economy and Industry, based on European standardisation requirements or American standardisation requirements; the standardisation requirements set by the Minister shall be at a level of safety equivalent to those foreign standardisation requirements and shall not prescribe requirements more stringent than those foreign standardisation requirements;
(b)with respect to a transportation product for which European standardisation requirements exist — an approval from a European recognised laboratory or an accredited vehicle laboratory as to its compliance with the European standardisation requirements, or with the standard of one of the member states of the European Union, provided that the requirements of that standard correspond to the level of safety established in the European standardisation requirements and that in that state operations are conducted in accordance with that standard;
(c)with respect to a transportation product for which American standardisation requirements exist — an approval from an American recognised laboratory as to compliance with the American standardisation requirements;
(d)with respect to a transportation product for which an Israeli standard exists that was set by the Minister by Order, after consultation with the Minister of Economy and Industry, and which is not an official standard — an approval from an accredited vehicle laboratory as to its compliance with that standard;
(e)with respect to a transportation product for which there are no standardisation requirements as referred to in sub-paragraphs (a) to (d) — an approval from an accredited vehicle laboratory as to its compliance with quality and safety requirements set by the Minister, after consultation with the Minister of Economy and Industry, based on a specification approved by the Standards Institution under the Standards Law;
(3)that person has presented a plan approved by an accredited vehicle laboratory for the manufacture of the transportation products that the person seeks to manufacture at the manufacturing plant.
(b)The Director shall indicate in the licence under this Section the transportation product model that the licence holder is permitted to manufacture at the manufacturing plant.
Equipment, installations and supervision arrangements§
101.

A holder of a licence for the manufacture of transportation products shall maintain at the manufacturing plant appropriate equipment and installations required for the manufacturing process and shall operate in accordance with the supervision arrangements under section 98(4) and (5).

Safety defect in the manufacture of transportation products§
102.

Where a holder of a licence for the manufacture of transportation products has discovered that there is a serial defect in a transportation product that the person manufactured and that the defect is liable to affect the safety of the vehicle in which the product is installed or is intended to be installed (in this Section — a safety defect) —

(1)that person shall publish a notice of the matter, in the manner and at the time set by the Minister, with the approval of the Committee;
(2)that person shall invite to the person's premises all those who received the transportation product from that person, unless there is a substantial difficulty in locating them, for the purpose of treating the safety defect, and if the transportation product cannot be repaired — for the purpose of replacing it, all without charge.
Obligation to mark a transportation product by a holder of a licence for the manufacture of transportation products§
103.

Upon the completion of the manufacturing process, a holder of a licence for the manufacture of transportation products shall mark, on the transportation product that the person manufactures or on its packaging, in addition to the particulars that the person is required to mark under the Consumer Protection Law, the catalogue number of the product and the standardisation requirements in accordance with which it was manufactured.

Description of a transportation product by a holder of a licence for the manufacture of transportation products§
104.

A holder of a licence for the manufacture of transportation products shall provide a full and accurate description of the transportation products that the person manufactures.

A transportation product not manufactured in accordance with the manufacturing plan or not identical to the prototype§
105.
(a)A holder of a licence for the manufacture of transportation products shall not manufacture a transportation product unless the product is manufactured in accordance with a manufacturing plan approved by the Director and is identical to the prototype of the transportation product as referred to in section 100(a)(2) and (3) approved by the Director.
(b)The Director may instruct a holder of a licence for the manufacture of transportation products to cease the manufacture of a transportation product model that was manufactured contrary to the provisions of subsection (a), until such conditions as the Director instructs the licence holder to fulfil are met, provided that the licence holder has been given an opportunity to state that person's contentions.
(c)The Director may instruct a holder of a licence for the manufacture of transportation products who manufactured a transportation product contrary to the provisions of subsection (a) to invite to the person's premises all those to whom that person transferred possession of the relevant transportation product, for the purpose of repairing the product and bringing it into conformity with the manufacturing plan; if the transportation product cannot be repaired — the provisions of section 32 of the Consumer Protection Law shall apply with the necessary modifications.
Manufacture of a transportation product at a manufacturing plant§
106.

A holder of a licence for the manufacture of transportation products shall not manufacture a transportation product except at the manufacturing plant approved by the Director under section 98(2).

Warranty for transportation products — holder of a licence for the manufacture of transportation products§
107.
(a)A holder of a licence for the manufacture of a transportation product shall provide a warranty for the transportation product that the person manufactures of not less than three months or 6,000 kilometres of travel, from the date of installation of the product in a vehicle, and if no such installation is required — from the date of its delivery to the customer, all according to whichever is the earlier; the Minister, with the approval of the Committee, may amend the period or the number of kilometres referred to in this subsection.
(b)Notwithstanding the provisions of subsection (a), where a longer warranty period than the period referred to therein has been prescribed by law, including under the Consumer Protection Law — the longer period shall apply.

Section C: Importation of Transportation Products

Determination of application to transportation products — Section C§
108.

The Minister shall prescribe by Order, having regard to safety or environmental considerations, transportation products or types of transportation products to which the provisions of this Section shall apply, including according to the intended use of the transportation product or the purpose of its use, excluding transportation products for a vehicle of the tractor type that is not a cargo quadricycle type, a quadricycle, or an off-road vehicle, and for a vehicle exempt from registration and licensing obligations under that Ordinance; an Order as aforesaid shall be prescribed with the consent of the Minister of Finance and the Minister of Economy and Industry.

Importation of a transportation product model§
109.
(a)A person is entitled to import a transportation product model if that person holds a licence for trading in transportation products and the transportation product model that the person seeks to import meets the requirements of an official standard, in accordance with an approval from an authorised laboratory, and if there is no official standard for the model — upon the fulfilment of one of the following, as applicable:
(1)with respect to a model for which European standardisation requirements exist — those standardisation requirements, or the requirements of a standard of one of the member states of the European Union, provided that the requirements of that standard correspond to the level of safety under the European standardisation requirements and that in that state operations are conducted in accordance with that standard;
(2)
(a)with respect to a transportation product model for which American standardisation requirements exist — those standardisation requirements, and the applicant shall also submit a written declaration that the model has been marketed in the United States for at least eight months at the time of submission of the application, and that no recall notice (Recall) has been published in respect thereof on the website of the United States National Highway Traffic Safety Administration (NHTSA) in the three years preceding the submission of the application, or a notice of an investigation in the two years preceding the submission of the application; the Minister may prescribe provisions regarding the publication of such notices and their examination, including additional or alternative means of publication or examination as aforesaid;
(b)in addition to the provisions of sub-paragraph (a), with respect to a transportation product model as referred to in that sub-paragraph that is manufactured outside the United States and is not imported from the United States, the importer must prove that the product is manufactured at a plant in which the serial production of that product conforms to the prototype of the product;
(3)with respect to a transportation product model that is marked on it or on its packaging as having both European standardisation requirements and American standardisation requirements — the European standardisation requirements;
(4)with respect to a transportation product model for which an Israeli standard exists that is not an official standard, prescribed by the Minister with the consent of the Minister of Finance and the Minister of Economy and Industry — the requirements of that standard;
(5)with respect to a transportation product model for which there are no standardisation requirements or standards as referred to in paragraphs (1) to (4) — quality and safety requirements prescribed by the Minister with the consent of the Minister of Finance and the Minister of Economy and Industry;
(6)with respect to a transportation product model for which Canadian standardisation requirements exist — those standardisation requirements, provided that the Minister, with the approval of the Committee, has prescribed transportation product models for which Canadian standardisation requirements exist that may be imported if they meet those standardisation requirements, and the means of proving compliance therewith; in regulations under this paragraph the Minister may prescribe that the provisions of this Section shall apply to those transportation product models, with such adaptations and modifications as the Minister shall prescribe.
(b)Proof of a transportation product model's compliance with the requirements referred to in subsection (a) shall be as set out below:
(1)with respect to an original transportation product model — by means of a marking on the product or on its packaging, lawfully prescribed by the vehicle manufacturer, identifying the manufacturer, or by means of the presentation of an approval from the vehicle manufacturer, or a certificate from a European recognised laboratory, an American recognised laboratory or an accredited vehicle laboratory, as to the model's compliance with the vehicle manufacturer's specification requirements;
(2)with respect to an alternative transportation product model for which European standardisation requirements exist as referred to in subsection (a) — by means of the presentation of a certificate from a European recognised laboratory or an accredited vehicle laboratory that has been accredited for this purpose;
(3)with respect to an alternative transportation product model for which a standard of one of the member states of the European Union exists as referred to in subsection (a) — by means of the presentation of a certificate from a European recognised laboratory or an accredited vehicle laboratory;
(4)with respect to an alternative transportation product model for which American standardisation requirements exist as referred to in subsection (a) and which is imported from the United States — by means of one of the following: a declaration by the manufacturer of the transportation product, a certificate from an American recognised laboratory, or a certificate from an accredited vehicle laboratory;
(5)with respect to an alternative transportation product model for which American standardisation requirements exist as referred to in subsection (a) and which is not imported from the United States — by means of a certificate from one of the following: a European recognised laboratory, an American recognised laboratory, or an accredited vehicle laboratory;
(6)with respect to an alternative transportation product model that is marked in accordance with standardisation requirements that include both European standardisation requirements and American standardisation requirements as referred to in subsection (a) — by means of the presentation of a certificate from a European recognised laboratory or an accredited vehicle laboratory;
(7)with respect to an alternative transportation product model for which Israeli standard requirements exist that are not an official standard as referred to in subsection (a) — by means of the presentation of a certificate from an accredited vehicle laboratory;
(8)with respect to an alternative transportation product model for which quality and safety requirements have been prescribed under subsection (a) — by means of the presentation of a certificate from an accredited vehicle laboratory or by another means prescribed by the Minister with the consent of the Minister of Finance and the Minister of Economy and Industry;
(9)with respect to a transportation product model for which Canadian standardisation requirements exist — in accordance with the provisions prescribed by the Minister as referred to in subsection (a).
(c)In addition to the provisions of this Section, a person is entitled to import tyres if, from the date of manufacture of the tyre, a number of months as prescribed by the Minister, after consultation with the Minister of Economy and Industry, has not yet elapsed; the Minister may prescribe additional conditions for the importation of tyres, including different provisions for importation from different places, and exceptions or alternative conditions to the standardisation requirements and the means of proof prescribed in this Section.
Licensing obligation with respect to the importation of certain transportation products§
110.
(a)Notwithstanding the provisions of section 109, the Minister may prescribe types of transportation products that a person shall be entitled to import if an import licence has been granted to that person by the competent authority for importation, after the authority has found that the conditions referred to in section 109 have been fulfilled.
(b)No person shall import a transportation product subject to a licensing obligation under this Law without an import licence, if a condition of the conditions for receiving the licence has ceased to be fulfilled or contrary to the conditions of the licence.
Exemption from the obligation to prove compliance with standardisation requirements§
111.
(a)Notwithstanding the provisions of section 109, a person seeking to import a transportation product of the same model that was lawfully imported under that section may submit to the Director an application for an exemption from the obligation to prove the model's compliance with standardisation requirements as referred to in that section, excluding an official standard; a person applying for an exemption under this Section shall attach to the application information and documents, to the satisfaction of the Director, that will enable the Director to identify the transportation product model.
(b)The Director may approve an application for an exemption under subsection (a), by a reasoned written decision, if the Director is satisfied that the transportation product model sought to be imported is identical to the model that was lawfully imported and in respect of which it has been proved that it meets the standardisation requirements.
Importation of transportation products for personal or family use or for the needs of an educational institution§
112.
(a)A person seeking to import transportation products for personal or family use is entitled to import transportation products or to receive a licence for their importation under section 110, as applicable, for the importation of up to five transportation products of the same type in a consignment, upon the fulfilment of all of the following:
(1)the transportation products are intended for personal or family use, and if that person is self-employed — for self-business use;
(2)the transportation products are of a type prescribed by the Minister by Order from among the transportation products prescribed under section 108;
(3)the transportation products meet the standardisation requirements under section 109(a), to the extent that such requirements exist; proof of the transportation products' compliance with the standardisation requirements shall be in accordance with the following provisions:
(a)with respect to a transportation product model for which an official standard exists and the product is subject to an obligation to meet the requirements of an official standard in accordance with the provisions of section 9(a)(1) of the Standards Law —
(1)if the official standard is based on European, American or Canadian standardisation requirements under section 109(a), and in accordance with those requirements there is a marking on the product or on its packaging attesting to its compliance with those requirements, or if the importer of the product has provided other written information, to the satisfaction of the Director, attesting to the product's compliance with those requirements — by means of an approval from a competent authority for importation, unless the importer of the product has requested to transfer the product to an authorised laboratory for the purpose of obtaining its approval;
(2)if there is no marking or other written information as referred to in sub-paragraph (1) in respect of the product model — by means of an approval from an authorised laboratory;
(b)with respect to a transportation product model for which an official standard exists but the product is exempt from the obligation to meet the requirements of the official standard in accordance with the provisions of section 9(a)(2) of the Standards Law — by means of an approval from a competent authority for importation, unless the importer of the product has requested to transfer the product to an accredited vehicle laboratory for the purpose of obtaining its approval;
(c)with respect to a transportation product model for which no official standard exists —
(1)if there are European, American or Canadian standardisation requirements for the product model under section 109(a), and in accordance with those requirements there is a marking on the product or on its packaging attesting to its compliance with those requirements, or if the importer of the product has provided other written information, to the satisfaction of the Director, attesting to the product's compliance with those requirements — by means of an approval from a competent authority for importation, unless the importer of the product has requested to transfer the product to an accredited vehicle laboratory for the purpose of obtaining its approval;
(2)if there is no marking or other written information as referred to in sub-paragraph (1) in respect of the product model as referred to in that sub-paragraph — by means of an approval from an accredited vehicle laboratory, unless the Minister has prescribed by Order with respect to that type of transportation product that proof of its compliance with the standardisation requirements shall be by means of an approval from a competent authority for importation.
(4)the applicant has declared in writing that the transportation products will be installed in a vehicle at a garage that has received a licence to operate a garage, unless under this Law installation at a garage is not required;
(5)(Repealed)
(a1)
(1)The Minister may exempt, by Order, a type of transportation product for which no official standard exists as referred to in subsection (a)(3)(c) from the obligation to prove compliance with the standardisation requirements as referred to in that subsection;
(2)The Minister, in consultation with the Minister of Economy and Industry, may prescribe that proof of a type of transportation product's compliance with standardisation requirements under subsection (a)(3), which is effected by means of an approval from a competent authority for importation under that subsection, shall be effected by means of an approval from an authorised laboratory or an accredited vehicle laboratory, as the Minister shall prescribe according to the matter;
(3)The Minister, with the consent of the Minister of Finance and with the approval of the Committee, may prescribe cases and circumstances upon the occurrence of which transportation products imported in the quantity referred to in subsection (a) shall be regarded as products not imported for personal or family use.
(b)A person seeking to import transportation products for the needs of an educational institution is entitled to import transportation products or to receive a licence for their importation under section 110, as applicable, for the importation of transportation products in the number required for the needs of the educational institution, and the provisions of subsection (a)(1) to (3) shall apply for this purpose, with the necessary modifications.
(c)No person shall import a transportation product under this Section for the purpose of selling it to another.
Importation of original transportation products§
113.

The Minister may prescribe, on grounds of safety and protection of public welfare, types of transportation products that may not be imported unless they are original transportation products; Regulations under this Section shall be made with the consent of the Minister of Finance and the Minister of Economy and Industry and with the approval of the Committee.

Importation of used transportation products§
114.
(a)No person shall import used transportation products.
(b)Notwithstanding the provisions of subsection (a), the competent authority for importation may grant a licence for the importation of used transportation products —
(1)for the purpose of their installation in a collector's vehicle within its meaning under the Traffic Ordinance [New Version], subject to conditions to be prescribed in the licence;
(2)of a type prescribed by the Minister, after consultation with the Minister of Economy and Industry, subject to conditions to be prescribed in the licence.
(c)In this Section, "transportation product" — as defined in section 2.
Exemption from fulfilment of conditions for the importation of transportation products or for the receipt of a licence for the importation of transportation products§
115.

The Minister, with the approval of the Committee, may prescribe that upon the occurrence of circumstances to be prescribed, the competent authority for importation shall be entitled to grant an importer of transportation products an exemption from the fulfilment of the conditions for the importation of a transportation product or from receiving a licence under sections 109 and 110, as applicable, and the Minister may in that connection prescribe alternative or supplementary conditions to those conditions; however, no exemption shall be granted under this Section with respect to goods whose importation is prohibited under any law.

Section C — limitation on application§
116.

The Minister, with the approval of the Committee, may prescribe that certain provisions of this Section shall not apply to the importation of transportation products intended for installation in a vehicle of a type to be prescribed.

Page 6 of 12

Read the entire law on one page — continuous text, no page breaks, plus formal citations.