Israeli Legislation.com
RegulationsHealth

Public Safety (Assemblies) Regulations, 5749-1989

תקנות הבטיחות במקומות ציבוריים (אסיפות), תשמ"ט-1989

Published: 1989-08-24Consolidated Hebrew text as of 2023-09-18 · Last amended 2023-12-24
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

By virtue of my authority under Section 2 of the Public Safety Law, 5723-1962 (hereinafter – the Law), and after consultation with the Minister of Police, I hereby make these Regulations:

Interpretation§

1.
(a)In these Regulations –

"person in charge" – a person in charge of safety at a permanent assembly venue under section 4 of the Law or the person in charge of safety at a public rally under section 6 of the Law;

"engineer" – an engineer in the service of the competent authority, registered in the register of engineers and architects maintained under section 8 of the Engineers and Architects Law, 5718-1958;

"the competent authority" – the licensing authority as defined in the Business Licensing Law, 5728-1968;

"sports ground" and "sports hall" – as defined in the Building Regulations;

"panic lock" – a lock that enables a door to be opened by pushing from the inside only;

"fire authority" – as defined in the Fire Services Law, 5719-1959;

"Magen David Adom station" – the Magen David Adom station nearest to the permanent assembly venue or to another assembly venue;

"the Building Regulations" – the Planning and Building Regulations (Application for Permit, Its Conditions and Fees), 5730-1970.

(b)A duty imposed by these Regulations on the person in charge is also imposed on the organiser of the assembly, and this is so unless a different intention is implied.

Application§

2.

These Regulations apply only to –

(1)assemblies in which the number of actual participants or the estimated number of participants is two hundred or more;
(2)assemblies at a permanent assembly venue, if the number of actual participants or the estimated number of participants in all the places in that building designated for the gathering of persons is two hundred or more.

Restrictions on Spectators at a Sporting Event§

2a.
(a)A person shall not enter the sports activity arena at the time of a sporting event or close to it, unless a police officer or a sporting event organiser has granted permission to do so.
(b)A person shall not throw any object towards the sports activity arena at the time of a sporting event or close to it.
(c)A person shall not throw an object that is liable to cause damage, obstruction or disturbance to public order at a place where a sporting event is being held.
(d)For the purpose of this regulation, "sports association", "league", "sports organisation" and "federation" – as defined in the Sports Law, 5748-1988;

"sports activity arena" – the area delimited by a separation fence at a sports ground or a separation barrier at a sports hall, as defined in the Second Schedule to the Building Regulations, or the area marked by separation or marking means or alternative means as referred to in regulation 2b;

"sporting event organiser" – the chairperson of the sports association hosting the sporting event or the chairperson of the federation, league or sports organisation that organised the sporting event.

2b.§

(Repealed — תשס״ה)

Prohibition on Bringing in Dangerous Objects and Animals§

3.

A person shall not bring into a place where an assembly is being held an animal that is liable to cause harm or panic, materials that are liable to explode or ignite, or any other thing that is liable to constitute an obstruction or hazard to safety.

Maximum Number of Persons Assembled§

4.

The person in charge shall affix above the entrance gates to the assembly venue a notice stating the name of the person in charge and the maximum number of persons permitted to be present at that venue at one time.

Enforcement of Density Restrictions and Duty to Warn§

5.

The person in charge shall not permit the presence at an assembly of a number of persons exceeding the number stated in the notice under regulation 4, and shall explicitly warn the organiser of the assembly that this duty applies to the organiser as well.

Use of the Venue§

6.

The person in charge shall mark at the assembly venue the places designated to remain vacant, shall fence off the areas designated as standing areas, subject to what is stated in section 18 of Part 1 of the Schedule, and shall ensure that the passageways remain clear and that no use is made of the venue contrary to its designated purpose.

Prevention of Crowding§

7.

The person in charge shall not permit persons to crowd in any part of an assembly venue or at its entrance in a manner that is liable to endanger safety at the assembly venue, regardless of whether that venue is a permanent assembly venue or not.

Prohibition on Holding an Assembly in a Dangerous Place§

8.

An assembly shall not be held at a place where there is danger to persons from collapse, water, electricity, gases, odours, heat, cold, explosives, weapons, animals and the like, unless prior approval has been given by an engineer, in coordination with the district commander of the police and the director of the district health office and after all the conditions stipulated in that approval have been fulfilled; the burden of proof that approval was given lies on the person claiming it.

First Aid, Fire-Fighting Equipment and Parking Areas§

9.
(a)The person in charge shall ensure for every assembly appropriate arrangements for first aid and fire prevention, in coordination with the Magen David Adom station and the fire authority and in accordance with their instructions, and shall also ensure appropriate entry and exit arrangements for persons attending an assembly.
(b)The person in charge shall also ensure for the assembly parking spaces for vehicles, in coordination with the person appointed for that purpose by the district commander of the police.

Permanent Assembly Venue§

10.

At a permanent assembly venue the provisions of the Schedule shall apply, and the person in charge shall ensure their observance.

Consecutive Performances§

11.

At a permanent assembly venue where performances are held consecutively –

(1)there shall be an interval between one performance and the next of at least a quarter of an hour, and at a sports ground and at a sports hall – of at least half an hour;
(2)spectators at a performance shall not be permitted to enter until all spectators at the preceding performance have left the venue.

Giving Notice§

12.

Notice of a public rally under section 5 of the Law shall be given in three copies to the district commissioner, who shall forward a copy thereof to the district commander of the police in whose area the public rally is to be held.

Revocation§

13.

The Public Safety (Assemblies) Regulations, 5725-1965 (hereinafter – the 5725 Regulations) – are revoked.

Commencement§

14.

These Regulations shall come into force sixty days from the date of their publication.

Transitional Provisions§

15.
(a)In a permanent assembly venue that lawfully served that purpose immediately before the day of commencement of these Regulations and in respect of which a permit was granted under the Building Regulations and the permit is still in force at that time, the following special provisions shall apply:
(1)the installations, arrangements and the like (hereinafter in this regulation – the installations) that were installed at that venue in accordance with the 5725 Regulations shall be maintained in a proper condition fit for use;
(2)if installations as aforesaid have gone out of use or are no longer fit for use even after repair, they shall be replaced subject to compliance with the provisions of the Schedule to these Regulations;
(3)the competent authority may, in the course of replacing installations as referred to in paragraph (2), grant an exemption from compliance with a provision of the Schedule to these Regulations, on conditions that appear to it appropriate, if it is satisfied that the safety of the public will not be impaired and that the circumstances of the matter justify this;
(4)the obligation of maintenance and replacement as referred to in paragraphs (1) and (2) shall also apply to the installations that replaced those that were replaced.
(b)Sub-regulation (a) shall apply, with the necessary modifications, also to a building or part thereof in respect of which a permit was granted under the Building Regulations before the commencement of these Regulations and the permit is still in force.
(c)Notwithstanding what is stated in sub-regulations (a) and (b), when a change occurs in a permanent assembly venue to which those sub-regulations apply, and the change requires a permit under the Building Regulations, the competent authority may make the use of that venue conditional upon its compliance with the provisions of these Regulations, in whole or in part.

Preservation of Status§

16.
(a)In this regulation –

"the determining date" – the 28th of Kislev 5723 (15 December 1962).

(b)In an assembly venue that existed on the determining date and in respect of which both of the following applied:
(1)on that date it regularly served as a place of public entertainment under a licence under the Public Entertainments Ordinance, 1935;
(2)on the day of commencement of these Regulations it continues lawfully to serve the purposes referred to in paragraph (1),

there shall continue to apply to it, notwithstanding the revocation of the 5725 Regulations, regulation 14a thereof, and for that purpose – also the other regulations in the 5725 Regulations that were referred to in the said regulation 14a.

(c)In an assembly venue to which sub-regulation (b) applies and subject to it, all the installations, arrangements and other things that were required to be installed at that venue under the 5725 Regulations shall be maintained in a proper condition.
(d)If a change occurs in an assembly venue to which sub-regulation (b) applies, and the change requires a permit under the Building Regulations, the competent authority may make the use of that venue conditional upon its compliance with the provisions of these Regulations, in whole or in part.

Schedule (regulation 10)

Part 1: Safety Provisions in a Permanent Assembly Venue

General Prohibition§

1.

A permanent assembly venue may not be used for the purpose of an assembly unless the provisions of this Part have been complied with therein.

Building and Use Permit – Condition for Use§

2.

A building or part thereof shall not serve as a permanent assembly venue unless the use for that purpose has been authorised by a permit under the Planning and Building Law, 5725-1965, and all the conditions of the permit have been fulfilled therein, or unless the provisions of regulation 15 or 16 apply to it.

Management Licence – Condition for Use§

3.

A building or part thereof shall not serve as a permanent assembly venue where its management for that purpose requires a licence under the Business Licensing Law, 5728-1968, unless the licence has been granted and all its conditions have been fulfilled.

Duty of Maintenance§

4.

In a permanent assembly venue, the installations, arrangements and other items installed in that venue pursuant to this Schedule and pursuant to the permit granted for that venue, for its construction or for its use, under the Building Regulations, including the Second Schedule thereto, and pursuant to any other law, shall be maintained in proper working order and fit for use.

Signage on Firefighters' Entry Doors§

5.

In a building in which a permanent assembly venue is located and that venue is intended for 800 spectators or more, a sign in red reading "Entry for Fire-Fighting Purposes Only" shall be installed on the front of the doors for firefighters' entry.

Protective Curtain§

6.

In the stage space of a permanent assembly venue intended for fewer than 400 spectators and in which there is no steel protective curtain, a non-combustible protective curtain of asbestos fabric shall be installed, together with an effective means of wetting with water; however, if an automatic fire detection system approved by the competent authority exists in that venue, a water curtain alone shall suffice.

Doors along Escape Routes§

7.

In a permanent assembly venue, during the holding of an assembly, all doors that open along escape routes and the doors of exit openings shall be free of locks, bolts or other reinforcing and closing devices, except for panic locks that shall operate properly.

Non-Fixed Seats§

8.

In a permanent assembly venue, the use of seats not permanently fixed to the floor shall be permitted if one of the following conditions is met:

(1)the seats are connected in groups of at least four and the approval of the competent authority has been obtained;
(2)the seats are located in a compartment intended for no more than eight seats.

Passageways between Non-Fixed Seats and Tables§

9.

In a permanent assembly venue with non-fixed seats and tables, the following passageways shall be maintained:

(1)between every two rows of tables there shall be a passageway of at least 2.20 metres in width;
(2)the distance between rows of tables adjacent to a wall and the wall shall be at least 90 cm;
(3)a section of contiguous table rows shall not exceed 15 metres, and between one section and the next there shall be a passageway of at least 1.10 metres in width; measurement of the distance for this purpose shall be made between the adjacent ends of the tables.

Minimum Area per Person§

10.

In a permanent assembly venue with non-fixed seats, the area per person shall not be less than 1 square metre; where the seats are fixed, the provisions of section 3.03 of the Second Schedule to the Building Regulations shall apply.

Maximum Temperature in a Projection Room§

11.

Where a permanent assembly venue contains a projection room, the external temperature of the heating stoves in that room shall not exceed 100 degrees Celsius.

Storage of Films in Projection and Rewinding Rooms§

12.

Where a permanent assembly venue contains projection and rewinding rooms, the following provisions shall apply:

(1)only films for immediate use shall be stored in them;
(2)only films shall be stored in a rewinding room, together with no more than 30 grams of film adhesive;
(3)the films shall each be stored in a separate metal box;
(4)the boxes containing the films shall be stored in metal cabinets;
(5)the cabinets for film storage shall be at least one metre away from projection equipment and electrical equipment, and there shall be a clear passageway of at least one metre in width in front of them;
(6)nitro-cellulose films shall be stored only in rewinding rooms insulated from the projection room as specified in Part 17 of the Second Schedule to the Building Regulations.

Dimmed Lighting§

13.

The dimmed lighting in a permanent assembly venue shall be activated at all times when assembly participants are present and shall enable them to leave the venue safely or to reach their seat or standing place; the intensity of the dimmed lighting shall not be less than 1 lux, as measured at floor level.

Orientation Lighting§

14.

The following provisions shall apply to orientation lighting in a permanent assembly venue:

(1)each orientation lighting unit shall be equipped with an indicator lamp that enables the proper functioning of the lighting unit to be identified when the inspector is standing on the floor;
(2)the activation time of orientation lighting units shall not exceed 3 seconds from the moment of interruption of the regular electricity supply, and their burning duration shall not be less than 30 minutes;
(3)the person in charge shall inspect the proper functioning of orientation lighting units at least once a fortnight and shall record the results of the inspection in a manner susceptible to verification.

"No Smoking" Sign§

15.

In a permanent assembly venue, red signs reading "No Smoking" shall be installed at the entrance to the seating space, the stage space, the area of the actors' rooms, the area for the storage and preparation of stage sets and props, and the workshops.

Identification Signs for Safety Installations§

16.

In a permanent assembly venue, identification signs for safety installations shall be installed at the following locations as described next to each location:

(1)on the front of electrical cabinets – "Electricity – Do Not Extinguish with Water";
(2)next to main switches of high voltage on main and regional electrical panels – "Main Switch", "Main Power", "Lighting – Main";
(3)at rescue equipment stations – "Rescue Equipment";
(4)next to the main stopcocks of firefighting water – "Main Stopcock of Firefighting Water";
(5)next to ventilation openings (smoke extraction) – "Emergency Ventilation Openings";
(6)next to emergency (safety) installations – a sign appropriate to its purpose.

Obstructions in Passageways§

17.

No chair or other object shall be placed or installed in passageways in a permanent assembly venue, even temporarily, except for a folding chair attached to a fixed seat, with the approval of the engineer, provided that the width of the passageway shall not be less than 130 cm when the chair is open.

Standing Places§

18.
(a)During the holding of an assembly in a permanent assembly venue, standing shall not be permitted unless the venue is a concert hall or a theatre.
(b)In a concert hall and in a theatre, standing shall be permitted only in places designated for that purpose, which shall be separated from the seating space by a railing, all subject to the approval of the engineer; the number of standing places in an enclosed hall shall not exceed 4 per cent of the number of seats in the hall, and at least 0.55 square metres shall be allocated to each standing place.

Prohibition of Protrusions§

19.

In a permanent assembly venue, nothing, including coat hooks, shall protrude from the wall of a corridor, passageway or staircase up to a height of 2.25 metres.

Stage in a Hall for Ceremonies and Celebrations§

20.

In a permanent assembly venue used for the holding of ceremonies and celebrations, there shall be no permanent stage fixed to the floor, and its area shall not exceed 30 square metres.

Page 1 of 2

Read the entire law on one page — continuous text, no page breaks, plus formal citations.

RegulationsHealth

תקנות הבטיחות במקומות ציבוריים (אסיפות), תשמ"ט-1989

Public Safety Assemblies Regulations

Assemblies Regulations 1989

Takkanot Bitachon Mekomot Tzibur Asipot

Public assembly safety

Crowd control regulations

Gathering regulations Israel

Assembly permits

Public assembly law Israel

Assemblies safety 5749