Israeli Legislation.com
RegulationsTax Law

Stamp Duty on Documents (Stamping by Mark) Regulations, 5728-1967

תקנות מס הבולים על מסמכים (ביול בסימן), תשכ"ח-1967

Published: 1967-10-20Consolidated Hebrew text as of 1969-03-12 · Last amended 2020-05-21
Premium
Unofficial English translation — for reference only. It may contain errors or omissions and cannot be relied on as a legal text. Only the Hebrew text published in Reshumot is legally binding.More

This English text was translated from the official Hebrew using a range of translation tools, and it undergoes ongoing checks and updates. It is not a certified translation.

Despite these checks, it may contain errors, omissions, or imprecise renderings of legal terminology and cross-references, and it may not yet reflect the latest amendments. It cannot be relied upon as a legal text.

The Hebrew text as published in Reshumot (ספר החוקים) and on the Knesset website is the sole authoritative and legally binding version. In any discrepancy, the Hebrew text prevails.

This translation is provided for informational purposes only and does not constitute legal advice. For use in legal proceedings, request a certified Expert Legal Opinion.

By virtue of my authority under Section 20 of the Stamp Duty on Documents Law, 5721-1961, I hereby make the following Regulations:

Definitions§

1.

In these Regulations –

"device" means a machine or stamp of any kind for the purpose of printing a mark only;

"approved model" means a model of a device approved under these Regulations;

"permit" means a written approval, under regulation 5 of the Stamp Duty on Documents Regulations, 5725-1965, for the stamping of a document by mark;

"the Director" includes any person authorised by the Director for the purposes of these Regulations, in whole or in part;

"invoice" means a document as referred to in Section 18 of Schedule A to the Law;

"counterpart" means a document as referred to in Section 19 of Schedule A to the Law, including a copy of a taxable document that is not authenticated in accordance with law;

"value card" means a card bearing a value, used for operating certain types of machines, given to a dealer by the Director subject to conditions as directed, and serving as evidence of payment of the tax;

"machine" means a machine in which a plate has been set for the purpose of printing a mark only;

"trader" means a person who holds a machine for business purposes and not for the purpose of stamping by mark, who has been registered under these Regulations;

"mark" means a mark published in regulations 5 or 8 of the Stamp Duty on Documents (Various Marks to Serve as Stamps) Regulations, 5727-1967;

"dealer" means a person to whom a permit has been given.

Stamping devices§

2.

The Director may give directions on any matter relating to stamping devices, including in respect of –

(1)types of devices to be used for stamping by mark and approval of a model from those types;
(2)holding of those devices for business purposes;
(3)acquisition of those devices and the manner of their use;
(4)the obligations of a trader or of a dealer, as well as the obligation to keep records necessary to ensure the proper implementation of these Regulations in respect of stamping by mark.

Application for registration as a trader§

3.

An application for registration as a trader shall be submitted to the Director in such manner as the Director shall direct.

Restriction on Registration as a Trader§

4.

No person shall be registered as a trader unless, inter alia, at least one of the following conditions is fulfilled in relation to that person:

(1)the person is the manufacturer of the machine;
(2)the person has submitted to the Director confirmation from the manufacturer of the machine that the person is the manufacturer's representative in all matters relating to the machine.

Application for a permit§

5.
(a)An application for a permit shall be submitted to the Director in such manner as the Director shall direct.
(b)An applicant for a permit shall sign an undertaking in the form set out in the Schedule and shall submit it together with the application.

Conditions for grant of a permit to stamp an invoice§

5a.

A permit to stamp an invoice by mark shall not be granted unless the applicant fulfils, inter alia, the following conditions:

(1)the applicant prepares at least one counterpart together with the invoice;
(2)the applicant maintains a system of books and records which, in the opinion of the Director, will ensure adequate supervision of the stamping of an invoice.

Retention of records§

6.

Records directed by the Director for the purpose of stamping by mark shall be kept at the place of business for at least two years from the date of the last entry.

Consequences of cessation of stamping by mark§

7.
(a)Where a dealer has ceased stamping documents by mark for a period that is not reasonable in the opinion of the Director, or where the permit granted to the dealer has been cancelled, the mark shall be removed from the device, upon demand by the Director, at the time and in the manner directed.
(b)Where a dealer has printed a mark on blank invoice forms and the permit has been cancelled, the dealer shall not use those forms unless the printed mark has been cancelled in a manner that is visibly apparent and to the satisfaction of the Director.

Conditions for approval of a model§

8.
(a)A model of a machine shall not be approved unless all of the following conditions are satisfied, inter alia:
(1)it has a counter that shows, in any manner, the serial number of each printing operation, including a printing operation of a mark at no value, or a similar operation, even if the mark was not printed on a document;
(2)it has a counter that accumulates the tax amount with each printing operation and the accumulated or reduced tax amount can be viewed at any time;
(3)where the machine is operated otherwise than by means of a value card – it has a counter by means of which the printing of the mark can be limited to a specified amount of tax;
(4)it has an aperture that allows reasonable access to every part of the machine, provided that this aperture can be sealed with a lead seal and an additional seal, to the satisfaction of the Director, bearing a special designation as directed;
(5)the serial number referred to in paragraph (1) is printed on the document whenever a mark is printed thereon.
(b)Notwithstanding the provisions of sub-regulation (a), the Director may, subject to conditions as directed, approve a model of a machine in which the requirement of paragraph (5) has not been satisfied, provided that the dealer shall print the serial number referred to on the document by means of a numbering machine.
(c)The Director may prescribe additional conditions to those prescribed in sub-regulation (a).

Discretion§

9.
(a)The registration of a person as a trader, the grant of a permit to a person, the approval of a model of a device, the cancellation of any of these, or the imposition of conditions thereon – are subject to the discretion of the Director, subject to these Regulations.
(b)The Director may amend any condition that has been imposed as aforesaid, and may also add any condition if, in the Director's opinion, the circumstances that existed at the time of the grant of the permit have changed.

Ancillary powers of implementation§

10.
(a)The Director may – if satisfied that it is necessary in order to ensure implementation of these Regulations or of the Director's directions concerning the obligations of a dealer or concerning the stamping of documents by mark – enter at any reasonable time the place of business of a dealer, in order to inspect any device, or in order to inspect documents stamped by the dealer by mark, including counterparts of such documents, as well as books, records and any other document relating to such stamping.
(b)A dealer shall make available to the Director, for the purpose of inspection, any of the matters referred to in sub-regulation (a).
(c)The Director may retain, for a reasonable period, a document stamped by mark which, in the Director's opinion, was not lawfully stamped, for the purpose of collecting the deficiency pursuant to the undertaking given by the dealer.
(d)The Director may, if satisfied that it is necessary in order to ensure implementation of these Regulations or of the Director's directions concerning the holding of devices or the obligations of a trader, enter at any reasonable time the place of business of a trader, in order to inspect any device or any record relating to a device.
(e)A trader shall make available to the Director, for the purpose of inspection, any of the matters referred to in sub-regulation (d).

Cancellation of registration or permit§

11.
(a)Where a trader or dealer has not complied with a provision of these Regulations, or has not fulfilled an undertaking given under these Regulations, or has breached a condition imposed by the Director, the Director may cancel the registration of the trader or cancel the permit.
(b)The Director shall not exercise the power under sub-regulation (a) unless the trader or dealer has been given an opportunity to state their arguments.

Publication in Reshumot (Official Gazette)§

12.

The Director shall publish a notice in Reshumot (Official Gazette) of each of the following:

(1)the registration of a person as a trader or the cancellation of such registration;
(2)(Repealed);
(3)the approval of a model of a machine or the cancellation thereof.

Cancellation of certain approvals§

13.

An approval or temporary approval in respect of a document by mark under paragraph (8) of regulation 15 of the Stamp Duty on Documents Regulations, 5725-1965, or a similar approval or document given to a person holding a machine for business purposes and not for the purpose of stamping a document, which were issued before the publication of these Regulations, shall be void upon the expiration of 60 days from the date of publication of these Regulations.

Fine§

14.

A person who contravenes a provision of these Regulations is liable to a fine of 500 lira.

Citation§

15.

These Regulations shall be cited as the "Stamp Duty on Documents (Stamping by Mark) Regulations, 5728-1967".

Schedule (regulation 5)

Letter of Undertaking

(All particulars set out in paragraphs (a) or (b) of the application (for a permit) must first be specified.)

1.§

I confirm that the contents of –

(1)the Stamp Duty on Documents (Stamping by Mark) Regulations, 5728-1967;
(2)the Director's notice concerning the registration of a person as a trader or concerning the grant of a permit to a dealer;
(3)the general conditions in that matter,

are known to me, and I undertake to comply with their provisions upon receipt of the permit.

2.§

I undertake to comply with all the provisions of the permit that will be granted to me.

3.§

I hereby undertake, following receipt of the permit, to pay to the Director upon first demand any amount, whether tax or arrears –

(1)which I have become liable to pay as a result of stamping a document by mark;
(2)which constitutes the difference between the tax with which the document was in fact stamped and the tax with which the document is to be stamped, in the opinion of the Director, unless I file an appeal against the Director's demand in the manner and at the time prescribed.
RegulationsTax Law

תקנות מס הבולים על מסמכים (ביול בסימן), תשכ"ח-1967

Stamp Duty on Documents Regulations

Stamping by Mark Regulations

Takkanot Mes Boulim

Stamp Duty Regulations 1967

Document Stamping Regulations

Stamp Duty Mark Regulations

Takkanot Mes Boulim al Mesamchim

stamp duty documents

document stamp mark

5728 stamp duty